[ Chinese wardrobe network ] Nowadays, many people's work is erratic, and they often go on a business trip. If they are on a business trip for a few months, they are no longer a few. If you want to live in a foreign country, you need to have certain living facilities. For example, a wardrobe is also necessary. We can't go anywhere to buy a wardrobe, it is best to buy a simple wardrobe as a temporary wardrobe, so it is also convenient to carry, wherever you can put the clothes neatly in the closet. The following small series will introduce you to the installation method of the temporary wardrobe.
1. Preparation for the temporary wardrobe before installation
Everything needs to be fully prepared for everything, even the installation of temporary wardrobes. First, you need to prepare the undercarriage parts of the temporary wardrobe and install them together according to the method specified in the drawings. It should be noted here that only the bottom part of the temporary wardrobe is installed. If the temporary wardrobe has a Shoe Rack, you need to first install the shoe rack part of the wardrobe. Then, the bottom of the temporary wardrobe panel is placed and dried for installation, and it is necessary to clearly understand the classification of the temporary wardrobe, such as the top panel, the bottom panel, the side panel, the neutral panel, and the laminate of the temporary wardrobe. The position of the panel of the above-mentioned temporary wardrobe needs to be placed in a fixed order, for example, the upper end is the top board, the left side and the right side are the side boards, and the lower end is the bottom board of the temporary wardrobe.
2, the temporary wardrobe installation process
When performing the specific installation process, make sure that the cabinet is facing down and start the installation from left to right or right to left. Do not open the bow left or right. After the assembly of the temporary wardrobe panel, it is necessary to ensure that the diagonal tolerance of the entire cabinet can be within plus or minus 1 mm. After the diagonal measurement of the cabinet is completed, it is necessary to mark the position of the laminate or the vertical plate on the left and right side panels to facilitate the smooth development of the subsequent work. After the cabinet of the simple modern wardrobe is placed in place, it is necessary to use the level to measure whether the cabinet is in the horizontal orientation. If it is inclined, it needs to be adjusted to the horizontal orientation. The common method is to pad things under one cabinet. After the cabinet is adjusted to the level, the clothes rail, drawer, door panel, sliding door, telescopic mirror, etc. are installed in sequence, and the handle can be installed and adjusted according to specific needs.
After the above is completed, it is necessary to cover the cloth of the simple temporary wardrobe instead of installing the rest of the shelves. The zipper of the cloth that is attached to the temporary wardrobe is opened, and the place where the middle is bonded is also pulled open, and the bottom is also bottomed down. It can be found that there are some pre-drilled holes at the bottom of the cloth. According to the orientation of each hole, the cloth is pulled down from the top to the bottom of each vertical tube. Then install the remaining tubes inside the cloth, pull the cloth up, cover the top of the temporary wardrobe that is combined with the tube, and then make appropriate adjustments. This temporary wardrobe is complete.
3, temporary wardrobe installation considerations
The installation of the temporary wardrobe is much simpler than the ordinary wardrobe, so there are not too many precautions. However, the temporary wardrobe has a simple structure and a relatively simple composition material. It must be handled lightly during installation, and it is not easy to damage the easily damaged parts such as accessories. Also, it is recommended that all screws be tightened with a screwdriver after all the wardrobes have been installed, which will result in a lot of solidity.
Nowadays, there are more temporary wardrobe categories on the market, which are cloth wardrobes. The installation method of this kind of wardrobe is very simple. Just assemble the frame according to the drawings and then put the wardrobe cloth bag on it. It should be noted that the installation should be as secure as possible, otherwise the wardrobe will be unstable after the clothes are placed. Temporary wardrobes are generally cheaper and can be used for a longer period of time, mainly for temporary use and not too long. Temporary wardrobes can be removed and retracted if not in use.
Vintage Nightstands,Natural Wood Nightstand,Large Nightstands,Blue Nightstands
Foshan Zheng Nengliang Home Furnishing Co., Ltd. , https://www.housecustomax.com