In recent years, the commodity economy is constantly developing, and the domestic label printing and packaging industry has made great progress. For specific content, please read the following explanation.
In particular, the printing of cigarette packets and labels can be said to be the most prominent use of advanced technology in the printing industry. In these two kinds of printed products, machines, consumables and technology have progressed to a situation that amazes overseas counterparts.
How to introduce the most advanced technologies and processes into our usual production, and make these technologies and processes practical and localized, so that the transparent plastic box becomes a tool that we can use in the development of new products in production, is The peers in the printing industry are devoted to research and discussion. Now there are two or two comments on the bonding of the gold-plating process and the label. If there is any inconsistency, the reader will not hesitate to correct it.
First of all, the gold stamping process is divided into cold blanching and hot blanching. The principle of cold ironing is mainly to use pressure and special glue to join the anodized aluminum to the substrate. The whole process does not need to be heated, nor does it need gold plate and pad technology. At the same time, the narrow-width rotation machine is relatively expensive and complicated to operate. In other words, economic convenience. Its topless stamping speed can reach 120 meters per minute. However, the cold foiling process started late, and the aluminum foil suffered from electrocution during the hot stamping process. The glossiness of the aluminum foil after ironing is not as good as that of hot foiling. There is no way to successfully suppress the concave ironing effect and other conditions. Because of this, until now So far, no large-scale application has been formed in China. Judging from the direction of future progress, this is a potentially powerful technology that is worth R & D.
The principle of blanching trusts everyone to hear it and recite it. In simple terms, there are three event elements: machine, anodized aluminum, and gold plate. The three major elements of technology are: temperature, pressure and speed. The gold-bearing form is from round to round, flat to flat. Speaking of machines, anyone who knows this process clearly knows that Stoner, which belongs to the Swiss Bost Group, is the world's recognized king of gold; in the case of anodized aluminum in the plastic box factory, Kurz has no doubt that it is gold The leader in the world; and when a printing company has a first-class gold-plating machine and anodized aluminum, the gold-plated version will be very tight after that. The German h + m company belongs to the Kurz Group, and its branding The gold plate can make the machine and anodized aluminum perfect joint. Because of this, there is often a joke in the gold foil industry: when a gold foil master has these three items, it is very bad to be hot, so you ca n’t complain about it. Of course, the pad technology is also very important in hot stamping, and to grasp this technology, it can only be determined by experience. Because of this, in a word, in addition to having first-class machines and consumables, the experience of technicians, that is, people, plays an important role in blanching.
Secondly, the branding process has made considerable progress in labeling applications in recent years. Especially laser and all information anodized aluminum, after the hot transfer effect, make the label products bright and beautiful, difficult to imitate. In view of the particularity of label forgery prevention, anodized aluminum generally needs to be considered appropriate and uses a thinner PET film and glue layer to facilitate transfer, thus achieving the goal of mass production at high speed. Compared with the cigarette packet printing process, there is less siege and interference between the bonding of anodized aluminum, varnish, and ink due to label printing. Because of this, the production rate is higher than the former. In addition to this, there is also a topic that can't help but pay attention. When the gold plate is scalding the laser and all the information of the anodized aluminum, in addition to the clean appearance of the surface, there is also a mirror polishing treatment to prevent the anodized aluminum from being transferred. As for matte, distortion. Therefore, the label products are smooth, shiny, and play the role of the plastic box to take care of the brand and increase the quality of the product. The current cold stamping technology is also progressing relatively quickly, and many label printing manufacturers are constantly expanding with this technology and are making efforts.
Soft Luggage
A half pound lighter than max lite 4, this lightweight 25 inch spinner maximizes your packing power and is the ideal checked bag for medium to long trips
4 wheel spinners rotate 360 degree for a smooth roll. Lightweight, sturdy PowerScope handle stops at 38 inch and 42.5 inch features a patented contour grip with rubberized touch points for easy maneuvering. Unique bottom tray design increases durability
Expands up to 2 inch to maximize packing capacity. Features low profile top, side and bottom carry handles, two exterior compartments, full length interior lid pocket, side accessory pocket and adjustable hold down straps for packing convenience
Limited Lifetime Coverage plus trusted companion promise, which covers the cost of repair for damage from airline or other common carrier for 1 year
Three piece luggage in one set with 20 inch,24 inch,28 inch upright,can be stored one into another.
better than polyester material ,the luggage is made of 1680D oxford cloth. 210D nylon lining
Four multi-directional spinner wheels and Telescopic Handle for easy mobility.
Canvas Luggage,Canvas Luggage Bag,Canvas Trolley Bag,Best Canvas Luggage, cheap trolley bags, travel luggage bag, waterproof travel bag
Zhejiang Yinglin Luggage Co. Ltd , https://www.yllcluggage.com