[ China Wardrobe ] In China, although the development of the overall wardrobe is still in the initial stage, as people's living standards continue to improve, everyone's understanding of the decoration has also reached a level. The overall wardrobe is also becoming an indispensable part of modern home decoration. The overall wardrobe is tailor-made, and environmentally friendly, fashionable, professional and other characteristics, will be destined to become a hot spot for household wardrobes in the next few years.
The whole wardrobe, also known as the wall-mounted wardrobe/customized wardrobe/cloakroom, has become one of the must-have furniture in Europe and the United States in the 1980s. In China, although the development of the overall wardrobe is still in the initial stage, as people's living standards continue to improve, everyone's understanding of the decoration has also reached a higher level. The overall wardrobe is also becoming an indispensable part of modern home decoration. The overall wardrobe is tailor-made, and environmentally friendly, fashionable, professional and other characteristics, will be destined to become a hot spot for household wardrobes in the next few years.
The overall wardrobe production process is different from the general purchase of panel furniture. First, the designer will have a close contact and communication with the user, understand the user's hobbies and their home style, and then measure the door to design a reasonable overall wardrobe. During this period, the designer will provide a computer rendering, and after the user is satisfied, the overall wardrobe will be made from the assembly line according to the drawings.
Plate
The board is the main component of the overall wardrobe, and its quality directly determines the quality of the product. The wardrobe panels on the market mainly use wood-based panels, while the use of solid wood is rare. Wood-based panels are further divided into splints, particle boards (particle board), and fiberboard. Among them, fiberboard has high density, medium density and low density.
1, particle board (particle board): middle long wood fiber + fine wood fiber on both sides, pressed into a board. Particleboard: Take the plantation, the trunk of the natural forest, the shaving of the branches or the shavings, formed by high temperature and high pressure. The advantage is that the expansion rate is small and the stability is strong. The disadvantage is that the nail holding power is small, the visual roughness is rough, and the glue amount is large. Only high-quality imported particleboard meets the highest European E1 standard, and the formaldehyde content is less than 0.9mg/100m.
2, MDF (fiberboard): powdered wood fiber is pressed at high temperature, the surface is flat, and it has the advantages of anti-deformation, good stability, high bearing capacity and strong nail holding power. The strength and hardness are better than the particle board, and the cost is higher.
2) Blockboard (commonly known as large core board)
Blockboard is commonly known as: "large core board", which is processed into a wooden strip of the same standard specification by sawing machine, and then made into a core board by glue, and then glued to the thin wood on both sides. Blockboard products.
1. At present, most of the blockboards used for cabinet processing in China are 20-25mm thickness specifications.
2, Blockboard has a large format, easy to cut, material toughness, strong bearing capacity, not easy to crack, Hansui itself has moisture resistance, strong nail holding power, easy to use and processing and other physical characteristics.
3. Defects: Since the surface of the blockboard can only be pasted with a certain thickness of fireproof board and PVC board, in order to reduce the cost, some domestic kitchen refused manufacturers often put a fireproof board on the front of the door panel, and the PVC film on the back side, the cabinet The front side is covered with PVC film (not seen on the glossy side). Because several materials with different properties and different shrinkage ratios are stuck together, with the change of temperature and humidity, several materials are mutually restricted, and delamination and bending deformation are easy to occur.
4. Nowadays, most of the curved doors and some door panels of domestic cabinet design are made of blockboard and fireproof board. If the edge banding is not bonded with imported hot melt adhesive, the quality hazard will be even greater.
Silicone Placemat ,Silicone Table Mat,Silicone Place Mat,Round Silicone Placemats
MeMe Baby Product (GZ) LLC , https://www.kupbo.com