Adopting sticky tape to seal the carton is economical, fast and easy to adjust. It can complete the upper and lower sealing operations at one time, and can also use printing tape to improve the image of the product. It is the first choice for automated packaging companies. The key component of the sealing machine is the drive motor. The larger the motor power, the better.
The faults and solutions of the sealing machine:
1. The nail movement of the sealing machine is too slow or the stroke of the nail is insufficient: the bolt is loose, the front buckle or the inner piece of the trigger is worn, at this time, the bolt can be tightened, pay attention to the correct position of the front buckle shaft, or you can replace the front buckle Or the internal film of the board machine, after completing the above actions, test its function, if the stroke is too short, fine-tune the front buckle shaft upward, if the action is slow, fine-tune the front buckle shaft downward;
2. Air leakage at the piston rod: the ring at the bottom of the main body is damaged, and the ring should be replaced at this time;
3. Air leakage at the exhaust port: the switch valve ring or switch seat ring is damaged or the piston ring is damaged. Replace the ring;
4. Air leakage at the trigger: the switch valve ring or switch seat ring is damaged. Replace the ring;
5. The transmission ring is loose and cannot be positioned: the plastic steel bar and the transmission spring are inelastic. Remove the combination of the trigger and reassemble the spring tip or replace the plastic steel bar and the transmission spring.
Stainless Steel Bakery Trolley
Stainless Steel Bakery Trolley,Bakery Rack Trolley,Bakers Rack Trolley,Bread Rack Trolley
Jiangmen Junerte Stainless Steel Kitchenware Co.,Ltd , https://www.jmjetkitchenware.com