In order to keep the moisture content of the wood stable, the following points should be noted in the decoration:
Â
First, use artificial boards. Compared with wood materials, texture performance of various wood-based panel material much more stable. Since the solid wood material has texture, when the temperature and humidity change greatly, cracking, warping and deformation will inevitably occur. The wood-based panel is used to break down the wood into wood chips or wood pulp, and then re-form the wood. Because the original physical structure of the wood is broken, the "deformation" of the artificial board is much smaller than that of the solid wood when the temperature and humidity change greatly.
Â
Second, the construction attention to details. In home decoration, the key to the quality of the wood lies in the construction, especially the details of the treatment: after all the wood products are installed, paint the paint immediately. This layer of paint, called "top coat", not only protects wood products, but also protects against moisture and maintains the normal moisture content of the wood; it cannot be drenched in the binder. At present, in the home decoration, white latex is generally used as a binder for wood products. Some workers exchange water in white latex in order to cut corners. This not only reduces the strength of the binder, but also causes quality problems when the wood product absorbs moisture; all wood is placed for a few days. After you buy the wood for decoration, it is best to put it in the decoration site for a few days before using it. The purpose of this is to make the moisture content of the wood close to the level of the new home.
Â
Third, buy materials should be careful. When you purchase wood for decoration , it is impossible to determine the moisture content of the wood by eye or hand touch. Therefore, some people lamented: If only by visual inspection, the moisture content of wood can be described as "the fairy is difficult to distinguish." In fact, there are some tips to help you determine if the moisture content of the wood is acceptable. Generally, the characteristics of dry wood are obvious, the weight is obviously reduced, the hand feel is not cool, the tapping is crisp, the “squeaky†sounds when the planer is pushed, the shavings are heated, and the surface is light. The wood with high water content is heavier, feels cold, and is not brittle when pushing the plane, even shaving. This type of wood cannot be used.
Dining Trolley,2 Tier Stainless Steel Service Trolley,Utility Service Trolley,Commercial Kitchens Hand Trolley
Jiangmen Vanky Stainless Steel Products Co., Ltd. , https://www.vankystar.com