With the advancement of society and the development of the economy, many offices use printers. Our office has added a network printer. The printer is an HP automatic duplex printer. I remember that I can always print automatically on both sides, but this time I installed it after duplex printing. Only manual. After some exploration, I finally changed the manual duplex printing back to automatic duplex printing.
Here's how to manually change the HP automatic duplex printer manually:
1. Let's take a look at the state before I modified it. Double-sided printing only prints manually. This means that you have to print out the paper with only one side to make a face change. If you make a mistake, the printing will be scrapped. So you have to switch back to automatic printing.
2. Ok, it’s starting now. Open the start menu first, right click on [Computer] and select [Manage] to open the computer management.
3. In the open computer management window, find [Device Manager] on the left. Then find the print provider on the right.
4. In the [WSD printing device], right click and select [Scan to detect hardware changes]. Then close the window.
5. Select [View Devices and Printers] in the Control Panel.
In the properties window that pops up, select [Device Settings]. We see below the window that the duplexer is not installed and allows manual duplexing to be enabled.
6. Modify the settings, select [Installed] for the duplexer and [Disabled] for manual duplex printing. Then click on Apply.
7. At this time, let's open the print options for the document. It can be seen that the [manual] word behind the double-sided printing has disappeared! At this time, automatic double-sided printing can be performed.
      The above is the HP automatic double-sided printer manual change back to the automatic method analysis, I hope to help everyone.
Teeth Whitening Kit,Office Teeth Whitening Kit,Teeth Whitening Gel,Teeth Whitening
Suzhou Longliqi Imp.&Exp. Co.,Ltd , https://www.longliqiexp.com