On May 21, 2011, Commission Regulation (EC) No 494/2011 was published in the Official Journal of the European Union (OJ), which revised Annex XVII of the REACH Regulation as shown below. The regulations will take effect on the 20th day from the date of publication.
1. Article 23, points 1 to 4 are amended as follows: 1. Not to be used in mixtures and articles made of synthetic organic polymers (so-called plastic materials), such as:
——Vinyl chloride polymer or copolymer (PVC) [3904 10] [3904 21]
——Polyurethane (PUR) [3909 50]
——Low-density polyethylene (LDPE), except when manufacturing colored masterbatch [3901 10]
——Cellulose acetate (CA) [3912 11]
——Cellulose acetate butyrate (CAB) [3912 11]
——Epoxy resin [3907 30]
——Melamine-formaldehyde (MF) resin [3909 20]
——Urea-formaldehyde (UP) resin [3909 10]
——Polyethylene terephthalic acid (PET) [3907 60]
——Polybutylene terephthalate (PBT)
——Transparent / ordinary polystyrene [3903 11]
——Acrylonitrile Methacrylate (AMMA)
——Crosslinked polyethylene (VPE)
——High pressure polystyrene
——Polypropylene (PP) [3902 10]
——High Density Polyethylene (HDPE) [3901 20]
——Acrylonitrile-butadiene-styrene copolymer (ABS) [3903 30]
——Polymethyl methacrylate (PMMA) [3906 10]
Mixtures or articles made from plastic materials whose cadmium content (mass percentage in plastic materials) is greater than or equal to 0.01% cannot be placed on the EU market.
As its exemption, paragraph 2 does not apply to items placed on the market before January 10, 2012.
Paragraphs 1 and 2 adopt Council Directive 94/62 / EC without discrimination and operate on this basis.
2. Cannot be used for pigments [3208] [3209]
For pigments containing more than 10% zinc in the pigment, the mass fraction of cadmium (expressed in the form of metallic cadmium) must not exceed 0.1%.
If the mass fraction of cadmium (expressed in the form of metallic cadmium) in the pigment (the mass fraction of the pigment in the coating product) exceeds 0.1%, it cannot be placed on the market.
3. As an exemption, for safety reasons, paragraphs 1 and 2 do not apply to dyeing mixtures containing cadmium.
4. As an exemption, paragraph 1, paragraph 2 does not apply to:
——The mixture made from PVC waste is called "recycled PVC",
——A mixture or substance containing recycled PVC, if cadmium (expressed in the form of metallic cadmium) is used in the following rigid PVC applications, the content does not exceed 0.1% (mass fraction of plastic materials):
(a) For the outer and sweet layers of the building;
(b) Doors, windows, shutters, walls, transoms, fences and roof gutters;
(c) decks and steps;
(d) Cable duct
(e) If there are multiple pipes, the recycled PVC is used as the middle layer and is completely covered by the brand-new PVC, which meets the requirements of paragraph 1
The supplier must ensure that the first time a mixture or article containing recycled PVC is placed, a clear, obvious, and permanent mark "contains recycled PVC" or the following mark should be used:
In accordance with Article 69 of this regulation, the exemption authorization of paragraph 4 will be reviewed before December 31, 2017, especially considering the reduction of the limited value of cadmium and the re-evaluation of exemptions from (a) to (e).
2. For Article 23, add paragraphs 8, 9, 10 and 11:
8. The mass fraction of cadmium in the brazing filler should not be greater than 0.1%.
If the mass fraction of cadmium (expressed in the form of metallic cadmium) exceeds 0.1%, the brazing filler material cannot be placed in the EU.
In this paragraph, brazing combines the use of alloying connection technology, whose temperature is above 450 ℃,
9. As an exemption, paragraph 8 cannot apply brazing fillers for protection or aviation, and brazing fillers are used for safety reasons.
10. If the content is higher than 0.01%, it cannot be put on the market:
(i) Metal beads or other metal components used to make jewelry;
(ii) Metal parts of jewelry and imitation jewelry and headwear, including:
-Bracelets, necklaces and rings;
-Penetrating jewelry;
-Watch and wristband;
-Brooches and cuffs.
11. As an exemption, paragraph 10 cannot be applied to the market before January 10, 2012. Jewelry over 50 years old cannot be placed on the market on January 10, 2012.
For details, please refer to Regulation (EC) No 494/2011.
Fitness Office Spin Desk Bike with Laptop Tray
combined exercise bike & Standing Desk
Are you tired of sitting at your desk for hours upon hours? Are you looking for a healthy alternative to the conventional ways of working in an office? We all know how bad sitting for 8hours a day is for your health, it is time for conventional office spaces to transform into healthier workplaces!
This new fitness office spin desk allows the user to gently cycle while working away the day.
Desk bicycle is a good choice and helps break up prolonged sitting with a safe and effective low-impact motion that promotes healthy blood circulation.
Quiet Operation – Ideal choice forcourteous office use without disturbing other coworkers.
Smooth Bi-Directional Pedaling – Customizeyour exercise with smooth forward and backward pedaling.
Easy-rolling Mobility – Four durable casterwheels with 360-degree swivel allow you to move the bike easily from room toroom.
Adjustable Magnetic Tension Resistance –Eight adjustable settings let you customize the intensity of the resistancewhile you pedal.
It is the best mate for height adjustable standing desks and Computer Desk. Best of all, you can easily track your progress while you exercise with the integrated LCD display, which shows readouts for workout time, pedal revolutions, distance, calories burned and speed.
Office Bike, Bike desk, Desk Bike, Fitness Office Spin Desk Bike, Exercise Bike
Foshan Hollin Furniture Co.,Ltd , https://www.foshanhollin.com