The so-called network cable socket, the correct name should be the network cable module, generally used in the indoor wall as a network cable jack. The installation of the network interface module in the home improvement wiring is a technical activity. In some home improvement projects, because some construction teams do not know the installation of the network part, the network wiring is not detected, resulting in the user discovering the network at the time of use. Nowhere. So in the future to avoid this situation, today Xiaobian to explain to you the wall cable socket connection.
      The wall cable socket connection is nothing more than the correct connection between the network cable and the information module, so that the network can pass, and now most of the family still use twisted pair (that is, the general network cable), the twisted pair is divided into two T568A and T568B The line order and the information module end access mode are divided into T568A module and T568B module. The wiring sequence corresponding to the two termination methods is as follows:
Step 1: Use a stripping tool or a crimping tool to strip the outer sheath of the twisted pair at about 10 cm in length (or a little longer, for easy back pressure). Four pairs of twisted pairs were exposed.
Step 2: Start the line. Do not disassemble the pairs before unpacking the corresponding pairs before pushing them into the string. Select our preferred line-sequence mode according to the color code indicated on the information module. (Note: It is best to use only one line-sequence mode in a cabling system. Otherwise, it will be unreasonable if the network is unreachable.)
Step 3: After pressing all the wires into each slot, use the tool to press the module and the line, press down firmly, clamp the line inside the module, and cut off the excess head.
The fourth step is to install the wired information module on the 86 box panel, so that the wall cable socket is installed.
      I saw the wall cable socket connection introduced by the above small series for you is not very simple, as long as there are tools, according to the method described by Xiaobian, it is not so difficult to install the wall cable socket.
Custom made miniature branding iron. Many shapes including alphabet branding ,smile face branding,crown iron branding ,circle iron branding,animal iron branding etc.. Heat on the grill and use on your grilled meats, or use on wood , ice or leather work.Making cook to perfection is an art.Buns ,tortillas,potatoes,pie crusts, let the pride run wild!These steak branding irons are available to customized.
Bbq Branding Iron,Custom Branding Irons,Branding Iron,Personalized Bbq Branding Iron
MEO DEMO CO., LTD. , https://www.meokitchentools.com