[ Chinese wardrobe net ] hollow wall or mezzanine to install a wall closet , although it is very convenient, but for these two wall-mounted wardrobe installation, consumers should be more careful, so as not to do the wall cabinet, wall or mezzanine Also damaged. So what is the installation condition of the assembled wall closet?
Installation conditions for assembled wall closets
1. The structural engineering and the structural joints of the wall closet have the conditions for installing the closet and the hanging cabinet, and the indoor level has an elevation line.
2. After the wall-type wardrobe frame and the fan enter the field, the processed products should be placed against the wall and the ground in time. The top surface should be coated with anti-corrosion paint. The other surfaces should be painted with a base oil, then the classification should be placed, and the bottom layer should be flat. Keep it ventilated and generally should not be stored in the open air.
3. The frame and fan of the wall closet should be inspected for the presence of corners, warps, bends, and cracks before installation. If any of the above defects are present, they should be repaired and assembled. The steel frame of the hanging cabinet should be inspected for specifications, and the deformation should be corrected and then installed.
4. The frame installation of the wall closet should be carried out before plastering; the installation of the fan should be carried out after plastering.
Assembly wall wardrobe installation process
1. Process flow: find the line positioning → frame, rack installation → wall cabinet, partition, fulcrum installation → wall (hanging) cabinet fan installation → hardware installation
2. Find the position of the line: Use the indoor uniform elevation line before plastering, and determine the corresponding position according to the height of the wall closet and the height of the upper and lower mouth according to the design and construction drawings.
3. Frame and frame installation: The frame and frame of the wall-type wardrobe should be carried out before plastering indoors. After being installed in the correct position, each nail of the two sides of the frame is nailed with two nails and the wall brick. The nail cap must not be nailed. Exposed. If the partition wall is an aerated concrete or a lightweight partition wall, it shall be fixed according to the structure required by the design. If the design does not require, the Φ5mm hole can be pre-drilled, the depth is 70-100mm, and the wooden wedge is pre-buried in the hole, and the glue is mixed with the cement slurry. After the hole is firmly bonded, the fixed cabinet is installed.
When using a steel cabinet, it is necessary to pre-embed the iron parts at the position where the hole fixing frame is installed, and to weld the frame parts.
When the frame and frame are fixed, the calibration, sleeve, and straightness should be corrected first, and the elevation, size, and position should be correct before fixing.
4. Installation of the partition wall fulcrum: Install the partition fulcrum strip (frame) according to the elevation position of the construction drawing and the required fulcrum structure. The fulcrum of the wooden partition is generally nailed to the wall brick, and the concrete partition is generally a truss iron or an angle bracket.
5. Assemble the wall closet cabinet fan installation:
1) According to the installation position of the fan, determine the hardware model and the direction of the split fan. Generally, the right fan in the opening direction should be the cover fan.
2) Check the size of the frame: the height of the frame should be measured at both ends; the width of the frame should be at the top, middle and bottom of the frame, and the corresponding part of the fan should be dotted.
3) According to the scribing, the frame fan will be trimmed for the first time, so that the frame and the fan are suitable for the seam. The test and the second planing line are prepared. At the same time, the position of the frame and the fan hinge groove is drawn, and the dash is avoided. Raise your head up and down.
Beard growth roller]Beard Derma Roller Make Hair And Beard Better Absorb Cosmetics, Help Promote Healthier, Thicker Hair And Beard.
CAN HELP TO REGROW HAIR - Our product isn't only for beards. It can also be used to help stimulate hair growth in balding areas on the scalp or any other desired area.
HEALTHIER SKIN - Roller can treat fine lines, shallow scarring, mild stretchmarks, hyper pigmentation and sun damage.SAFE AND PAINLESS - Our Beard Growth Roller has 0.3mm needles which is the best length to stimulate hair growth at home. The process is not painful as it only requires gentle pressure.
The roller works by making tiny and safe punctures on the skin to draw horomone and nutrient rich blood to the area. Use roller not only on your beard but also any problem areas such as your scalp.
Microneedling also works to improve skin by reducing fine lines and evening skin texture. Stimulate your skin by creating more blood flow and producing new collagen to the treated area. Roller is simple to use and comes in a clean matte black finish and storage case.
REMOVE ACNE SCARS and improves the appearance of hyperpigmentation. Many of customers claim that their acne scars banished after constantly using face roller. Experience your natural skin glow and reinvigorate your youth.
Skincare Derma Roller for Face,Microneedling Roller with 540 Titanium Micro Needles, Storage Case Included
Ningbo Mauri International Trading Co.,Ltd. , https://www.mauriproduct.com