The hp500 plotter is a device that automatically draws graphics according to people's requirements. It outputs the computer's output information in graphical form. Mainly can draw various management charts and charts, geodetic maps, architectural design drawings, circuit wiring diagrams, various mechanical drawings and computer-aided design drawings. The hp500 plotter is an early-large format large-format device from HP that can handle most of the output tasks of black and white drawings.
     The hp500 plotter can use a variety of different print media, such as tracing paper, drawing paper, coated paper, thick paper, transparencies, and HP inkjet heavy paper. Users can adjust margins and rotate through the plotter driver. Drawing and drawing images. Use the print window of the CAD software to set the print size, size and quantity, select the media type and paper feed mode, and finally click the [OK] button below the dialog box to send the task to the plotter. It is important to note here that the paper type selected in the driver or operator panel should always be the same or similar to the type of paper loaded in the plotter for the best print quality. If the paper type does not match, it will affect the accuracy and color of the printed image.
     The plotter operator panel provides a wealth of features for ink cartridge verification, media jam correction, and interrupt printing, all of which are required for high-precision printing. After each replacement of the print media, if the plotter detects a skew when feeding, the control panel will prompt you to reload the media, and the user can adjust the roller media in the following order:
(1) When loading paper, press the up or down arrow keys on the operation panel to select the type of media to be loaded until the LCD panel displays the correct media, then press the [Output] key, the plotter detects the media and automatically Feed paper.
(2) When prompted by the panel, lift the media loading handle.
(3) Pull the media on the left and right sides of the roller toward you until it is tight, then align the left and right edges of the media with the edges of the paper roll.
(4) When prompted on the panel, lower the media handle.
(5) When the panel is required to close the roller cover, turn the roller by hand to wind the loose part. Make sure the front edge of the media is exposed outside the cover and close the cover.
(6) Press the down arrow key to continue, and the plotter automatically trims several centimeters at the beginning of the medium.
(7) Printing can be started after the roller media is installed.
    The above is the introduction of the hp500 plotter, I believe that everyone has a deeper understanding, and hope that the above content can help everyone.
This part of BBQ Tools Set is packing with apron or bag for convenience while cooking or carrying.The fork,a slotted spatula , corn holders,skewers,shaker,tongs ,gloves all put in a apron bag.It is useful baking outdoor .By the way, the paking method is simple and lightweight. Certainly ,customized is accepted that you can print your logo on it or manufacture your design. Our bbq tools handle material have many different choice like hardwood ,beech,PP,PVC, bakelite , metal etc..
Bbq Set With Apron,Outdoor BBQ Set Apron,BBQ Nylon Bag Set,BBQ Tools With Apron or Bag
MEO DEMO CO., LTD. , https://www.meokitchenknives.com