[ Chinese wardrobe network ] [Chinese wardrobe network ] wardrobe personalized design, tailor-made features, deeply attracted consumers. However, many consumers do not know which material is the most environmentally friendly, and today we will find out about the wardrobe.
At present, the overall wardrobe panels on the market, mainly based on cost and technology, are mainly made of artificial panels, and few are made of solid wood. The wood-based panels are further divided into particleboard, fiberboard and large core panels. Among them, fiberboard has high density, medium density and low density.
Wardrobe sheet - particle board
Particleboard, also known as particle board, is made of medium-length wood fiber and fine-grained wood fiber on both sides. It is pressed into a plate by high temperature and high pressure. Its substrate is made of plantation, natural forest trunk, branch shavings or shavings. The particle board is usually 18mm, 25mm. The advantage is that the expansion rate is small and the stability is strong. The disadvantage is that the method is easy to make, the quality difference is big, and it is difficult to distinguish. The edge of the particle board is rough, easy to absorb moisture, the density is loose and easy to loose, the nail holding power is low, and the glue amount is large. Only the high quality imported particle board meets the highest European E1 level. Standard, formaldehyde content is less than 0.9mg/100m.
Wardrobe sheet - fiberboard
Fiberboard, also known as MDF, is made of powdered wood fiber by high temperature pressing. It has good surface flatness, good stability, high bearing capacity and better strength and hardness than particleboard. The internal structure of the fiberboard is uniform, the density is moderate, the dimensional stability is good, and the deformation is small. Therefore, the nail holding force is strong, and it can be disassembled and assembled many times, which is convenient for moving. Moreover, the melamine-finished fiberboard has the characteristics of moisture proof, anti-corrosion, wear resistance, high temperature resistance, etc., and does not require post-treatment, and the formaldehyde content is low. However, the processing precision and process requirements are high and the cost is high.
Wardrobe sheet - large core board
The scientific name is also called the blockboard. The middle layer is made of multi-layered wood strips. The two sides of the core are attached to the thin plate, which is worthy of the name. The large core board has a simple processing process and a good nail holding power. Disadvantages, combined with a variety of miscellaneous wood, the density difference is large, easy to deform, high moisture content; high formaldehyde content, can not be used directly, must be processed later.
Wardrobe sheet - MDF
MDF is divided into low density board, medium density board and high density board. The general wardrobe brand manufacturers will use medium density board and high density board. Some irregular manufacturers will use low density board for low profit. The moisture resistance of the MDF and the formaldehyde release content cannot meet the standard of use. Here, remind the consumers, do not have to customize the whole wardrobe because of the cheap to some informal wardrobe manufacturers.
Pet Bathing,Pet Grooming,pet bathing tool,pet bathing suit
AUTRENDS INTERNATIONAL LIMITED , https://www.petspetstoys.com