[ Chinese wardrobe net ] When purchasing the sliding door wardrobe , the most important thing is whether the pulley is good or bad, smooth, wear-resistant, pressure-resistant, safe and reliable, because it is directly related to the service life of the entire wardrobe. Then, what are the types, advantages and disadvantages of the sliding door wardrobe pulleys? Let's take a look at it.
The wardrobe pulleys are roughly divided into two types: pure metal wheels and rubber wheels (made of carbon fiberglass or nylon). Most brands use rubber wheels made of carbon fiberglass.
Pure metal wheel
Advantages: large bearing capacity, pressure resistance, wear resistance and deformation
Disadvantages: The sliding is not smooth enough, and the product is easy to rub when pushed and pulled.
Rubber wheel
Advantages: Because it is provided with non-drying grease, it can be easily pushed and pulled, smooth, and difficult to rub the product, making up for the shortcomings of the rubber wheel.
Disadvantages: The rubber wheel is synthesized from different materials. It is analyzed from the physical point of view. First, different molecules are synthesized by different atoms, and different materials are synthesized by different molecules. Due to the difference in the density of atoms, after the physical reaction, under the physical reaction of different atoms, the center of gravity of the pulley may be deviated, which may lead to imbalance. (Of course, this possibility is still relatively small)
Metal nylon double-in-1 pulley
Advantages: large bearing capacity, pressure resistance, wear resistance, no deformation, smooth sliding, smooth and no noise. The rubber wheel and the pure metal wheel have complementary advantages. They are developed according to the principle of four-wheel dynamic balance positioning of the car. Concentric circle processing, no eccentricity, no wear! (Automobile four-wheel dynamic balance positioning is to adjust the wheel trajectory. When each vehicle When the vehicle is assembled, it must be adjusted by four-wheel dynamic balance positioning, otherwise there will be heavy steering, trembling, no deviation, or single-side wear, wavy wear, block wear or partial wear.) Currently, the same industry brand Only Etlay makes the whole wardrobe use this kind of pulley.
430 Stainless Steel In-cabinet Trash Bin
In-cabinet Trash Bin is with punch-free hanging design. The kitchen wet waste bin could be hung on the kitchen cabinet door or wall by hook or removable adhesive strip, which is convenient for storing the kitchen wet waste and can effectively save space. And this small sealed trash can is equipped with semi-automatica slide open lid. Trash cans for kitchen cabinets is the first application of sliding cover structure in the household kitchen in-cabinet compost bin. The sliding cover structure uses a combination of gears, springs and dampers so that the lid can be automatically open slowly to a vertical state when the cover is slide by hand to 60 degrees from the horizontal. When the lid is closed by hand to 30 degrees from the horizontal, the lid can be automatically closed slowly. What's more, this stainless steel trash can for bathroom is designed with a small washable inner barrel, which is easy to empty and clean and could be cleaned in the dishwasher. Moreover, it is equipped with an odour filter placement for storing a piece of filter inside to reduce the moisture and odours inside the bucket.
Small Sealed Trash Can, In-cabinet Compost Bin, Trash Cans for Kitchen Cabinets, Stainless Steel Trash Can for Bathroom
ZHEJIANG ERHUI TECHNOLOGY CO.,LTD , https://www.jahhome.com