- 7-Ironâ„¢ PRO Mowing Deck
- Mulch On Demandâ„¢ Available
- Propane Option Available
- Cross-porting hydraulic transmission
- Spindle assembly provides greater performance and reliability
- Field-installed propane conversion kits for Commercial Walk-Behind Mowers, QuikTrakâ„¢ Mowers, and Commercial ZTrakâ„¢ Mowers
- Durable 7-Ironâ„¢ PRO decks pressed from a single piece of steel
- Three-year bumper-to-bumper warranty
- Powerful 27-hp (20.1-kW) commercial grade engine delivers class-leading performance and efficiency
- Michelin® X® Tweel® Turf rear tire solution for ZTrak™ Mowers eliminates downtime and reduces the cost of operation
- Standard comfort and convenience allows for easy deck height adjustment and PTO shutoff
- Available Mulch On Demandâ„¢ deck
- Three seat choices that offer exceptional operator comfort
- Model no.: FX850V
- Horsepower (gross): At 3,600 rpm, 27 hp / 20.1 kW
- Displacement: 52 cu in. / 852 cc
- Cylinders: Two
- Crankcase capacity: With filter, 2 U.S. qt / 1.9 L
- Oil filter: Full flow, replaceable
- Lubrication: Full pressure
- Cooling: Air
- Air cleaner: Pre-cleaner / Yes / Heavy-duty canister type with safety element
- Fuel type: Gasoline
- Fuel consumption: Under normal conditions, load, operation, and dependent on loads and operating conditions 1.1-1.9 U.S. gal./hr / 4.2-7.2 L/hr
- Fuel tank capacity: 11.5 U.S. gal. / 43.5 L
- Fuel tank switch/shut-off valve: Yes
- Charge system: 20 amp
- Battery voltage: 12 V
- Cold cranking amp: 300 amp
- Hour meter: Standard, digital
- Operator presence starting system: Brake-N-Go (foot)
- Wheel motors: Tuff Torq heavy-duty integrated piston wheel motor
- Travel speed: Forward / 0-12 mph / 19.3 km/hReverse / 0-4.5 mph / 0-7.2 km/h
- Speed and direction control: Twin levers
- Hydraulic capacity: 5.9 U.S. qt / 5.6 L
- Filter: Internal, replaceable
- Drive tires: 24x12-12
- Load rating: 4 PR
- Dynamic braking: Twin levers
- Park brake: Internal wet disk integrated in the transmission
- Park brake actuation: Foot brake
- Type: Electro-magnetic, 225 lb.-ft / 305 Nm
- Drive: V-belt
- Available widths: 60, 72 in. / 152, 183
- Deck construction: 7-Iron PRO, one-piece stamped steel with reinforcements
- Deck thickness: 7 gauge / 0.18 in. / 4.6 mm
- Discharge: Side, MOD
- Height-of-cut range: Increments / 0.25 in. / 0.64 cm / 1-5.5 in. / 2.54-14 cm
- Cutting width: 60, 72 in. / 152, 183 cm
- Length: Varies by deck size
- Thickness: 0.25 in. / 0.64 cm
- Tip speed: Approximately 18,000 fpm / 5,486 m/min
- Number: Three
- Caster wheel type: Flat free
- Caster wheel size: 13x6.5-6
- Front anti-scalp rollers: RH, center, LH
- Rear anti-scalp rollers: Optional
- Length: 84 in. / 213 cm
- Width: With chute down, 74, 86 in. / 188, 218 cm
- Height: With ROPS up, 73 in. / 185 cm / With ROPS down, 47 in. / 119 cm
- Weight: 1,292 to 1,340 lb. / 586 to 608 kg
Kingdo Handmade Cymbals include Splash Cymbals , Hi-Hat Cymbals , Crash Cymbals and Ride Cymbals , Finger Cymbals . The material is B20 bronze alloy(80% copper+20% tin). The kind of tradition cymbals size is 8'', 10'', 12'', 13'', 14'', 15'', 16'', 17'', 18'', 20'', 22''. The crafts of the handmade cymbals are Half original, Polishing, Traditional, Original, Threading. The cymbals are 100% handmade. Recently our Kingdo handmade cymbals have been deliveried to overseas countries, such as Thailand, Japan, USA, Philippines, Denmark. Besides Kingdo cymbals, we can supply OEM service.
Cymbal Photo
Our company Guangzhou Music Exhibition of 2018
Hope to cooperate well. Thanks.
Handmade Cymbals
Handmade Cymbals,Finger Cymbals,Traditional Cymbals,Drum Cymbals
Jinan Jusheng Musical Instruments Co.,Ltd. ,