Being a jewelery watch is in itself a supreme challenge to watch and jewelry craftsmanship, which is not good without a challenge and without value without a challenge. Really good jewelry table, it made the same difficulty and the final result. Really good jewelry table, it is the difficulty of making the final effect and the same, we are as guests of our unexpected. If a high jewelry table, its technology and effect is in your expectation, it can only say that this watch has not done the ultimate really good jewelry table, it is produced as difficult as the ultimate effect, We are all unforeseeable as a guest. Jewelry material and level Judge the pros and cons of jewelry watches, we must first look at its material, because the same watch, ordinary mechanical watches and jewelry watches are very different is that ordinary mechanical watches are performance-oriented, while the jewelry table is Fancy material. So look good or bad mechanical watch must first understand the function and quality of the movement, jewelry watch depends on its material is good enough. The precious materials used in jewelery watches, including gold, diamonds, precious stones and mother of pearl, are all non-renewable resources created by nature. In addition to giving people the most intuitive aesthetic, the value of jewelery is long-lasting. Therefore, the diamonds used in the watch, each one of the table size, thickness, cutting angle must be strictly abide by the standard, because if the diamond is not adjusted, it will affect the structure of the entire table may be distorted dial pointer may not operate correctly ...... The diamonds used in jewelry, can be adjusted by hand, without affecting the beauty of jewelry. There is, the diamonds used inside the watch are generally arranged in very neat, a little blemish can be seen at a glance, the jewelry inside the diamond is not the same, even if there is a small flaw but from a different point of view is to see Not come out. Therefore, the watch must be used in the diamond top, the average standard is: color must reach more than G color, clarity above VVS1, cut at least Very Good level. The amount of jewelry gems In addition to the specifications, the total number of jewels inlaid with precious stones is also important. Often buy high-level jewelry people often form a fixed concept, that is, the price of a high-level jewelry around the main stone is based on the size and quality to determine, rather than those groups with diamonds. It should be said that this concept is not entirely applicable to the jewelry watch. First of all, 99% of the jewelery watches do not have the concept of the main stone, only the cluster of diamonds; secondly, the group of diamonds set aside even though each one is not large, but its value is not low. In addition to this there are good quality factors, but also determined by the special nature of the gem processing. There is a particularly interesting phenomenon in the gem industry, that is, stones of the same specification, the more expensive the more you buy, the harder it is to match. You buy things in other industries, such as buying shoes, buy a pair is a price, certainly buy a million pairs cheaper, because mass-produced diluted costs; you go to the wholesale market to buy, a pair of shoes are not willing to sell people. But the gem industry is not the case, as long as you have certain requirements of the shape specifications, you want a group of exactly the same diamond, its price is certainly high. Because natural gems are difficult to have completely suitable, have to wear from small to large, it is impossible to grow older. If the raw material (stone) itself is relatively fixed price, not the pursuit of specifications, all with the shape to the mill is certainly the cheapest. The pursuit of specifications, as long as the amount is small, you can try to find some more close to the original stone to wear, so a high rate of production, the price is acceptable. The most afraid is that not only requires specifications, demand is large, it can only reluctantly to the original stone from small to cut, the large raw materials are cut small to meet the need. Such a price will skyrocket and may even add up to zero, which is ten times the spread. It is hard to understand outside the industry. In addition, the more specific shapes of gemstones used on jewelery watches - such as the diamond and emerald cut diamonds mounted on the bezel and bracelet - the higher the cost. And you have to wait, do not get it right away. Jewel is made of God, it is not man-made, you have to find the rough shape of the stone to the appropriate grinding, otherwise it is a real thing. Jewelry inlaid craft & ultimate pursuit With the ready-made gems, the test is the skill of gemstone testers in watchmaking. Due to the structure of the watch itself: the metal part of the watch is thinner than the jewelry, and the 18K gold itself is relatively soft and slightly distorted so that the same inlaid mode is more difficult to use in a watch than in a jewel , Whether it is more common nail set or on the cumbersome snow inlaid and invisible set. The most common type of jewel inlay on the jewels is micrognosis - see it as a very small, very fine prong, which needs to be operated under a 20x microscope. Each gem has a thickness, in order to only 12 millimeters thick metal structure inlaid with a very fine nail to grab the diamond, but also have a good fire color, effort is hard to spend Language to describe it. If you have a chance to give it a try, you can see that under a high magnification microscope, let's say the diamond is set on the watch. As long as the hand moves a little, it will be dizzy and dizzy with refracted light, exactly the same as motion sickness. Therefore, only the heart of a very quiet person to be competent, calm people can not do it. In Europe, France and Switzerland, jewelry watches have to do the old master, they have done a gem inlaid life, craft has been arsonist. On the other hand, there are many factories that make fine jewelry in China, but seldom do high-grade jewelry because it is more difficult and less calm. They give up for a while and will never reach that level. Earlier years, our magazine's consultant, Dr. Ren Jin, had designed an ultra-thin diamond-studded watch for himself and looked for an Earl 9P movement; however, Had trouble because at that time there was no teacher in the domestic jewelery industry who was able to pave diamonds on such a thin 18K gold dial. Finally there is no way, you can only "force to break the bureau," the diamond laser welding machine in the jewelry industry one by one "seam" in the dial, drill although "set" on, but the dial can not get out It's The above four elements can be described qualitatively or quantitatively, but the most valuable part is unchallenged, which is the ultimate pursuit. For example, to achieve a designer's design concept, you need thousands of gems out of the most vivid color combinations; the need to use the rare world of watchmaking materials or processes; jewelry craftsmen need continuous fighting hundreds of hours, The entire process of mosaic can not be any flaws; and even need to develop a special movement to be compatible. Of course, there are many ways to set the stones in the jewelery table, but none of them is easy. To the wealthy family table dial inlaid with 0.5 carats and 1 carat gem, if its weight is too light to spin up, too heavy and difficult to control the thickness; as small as the pointer on the embedded 001 carat level micro drill, it 0.2 mm in length but also gripped with metal claws ... The need for hand-made workmanship of these mosaics is even better than the assembly of complicated menus and the sanding of the movement. Jewelry "4C" identification Those who have contact with diamonds and jewelery must know the standard of "4C", and judge the value of "4C" whether they are big diamond, small diamond, main diamond or diamond. "4C" includes the color, clarity, weight, and cut of the diamond. If we say the gem-quality diamond, then it should be colorless and transparent, this can be guaranteed flawless or minimal flaw. The front also says that the diamonds used in the watch must be top-notch, with the average criteria: the color must be above G (near colorless), the clarity above VVS1, the cut at least very Good level. Like Patek Philippe, Rolex, Audemars Piguet watch the level of diamonds are even higher, it is necessary to achieve a purity of IF level (absolutely flawless level). It can be said that the jewelry watch itself is a watch and jewelry arts and crafts of the highest challenge, if not without the challenge is not a good thing, if there is no challenge there is no value. Really good jewelry table, it is the difficulty of making the final effect and the same, we are as guests of our unexpected. If a high jewelry table, its technology and effect is in your expectation, it can only say that this table has not yet done the best. This article is reproduced, does not represent the world position of million table.