How to test the performance of a pull machine?

The performance test of the instrument is indispensable, and the tension machine is no exception. How to test the performance of the tension machine?
“Test-improvement-retesting” is to analyze the failure modes and failure mechanisms of products that have been initially developed through testing and the weak links of the products, identify problems and immediately improve them, and then test and verify the results. The solution to the problem is to increase the reliability of the product. This method is used in the electronic product development stage, through system testing, after revealing product weaknesses, according to the specific circumstances, the immediate necessary improvement is to enable the product's reliability to have a substantial increase, this method is more suitable for testing Only a relatively common and serious problem has emerged, and it is more targeted.
Electronic products in the development phase, after systematic testing, according to the exposed problems for specific analysis, flexible application. The three methods commonly used in reliability tests are often cycled cyclically, and the reliability of one cycle is higher than that of a cycle product. In addition to the reliability test, the system tests must also pass the climatic environment test and machinery according to the specific conditions. Environmental testing and human normal use and other aspects of the test to expose the weak links of product production, comprehensive scientific analysis, and make corresponding improvements, so that electronic products in the design and development phase of its inherent reliability has further improved.