The ink stack failure caused by the ink means that the ink accumulates on the ink roller, plate, or blanket, and the ink transferability is poor. In addition to the causes of stacking ink, ink, printing pressure, and plate pressure are the reasons for stacking ink. The ink accumulates on the blanket, the pigment is in the form of powder in a separate state, and the dots are pasted to make the colors inconsistent. This is due to:
(1) The ink is poorly dispersed, and coarse inorganic pigments with relatively high relative densities are used in the ink.
(2) The ink film is too thick.
(3) The ink dilutes excessively and the linking material is too thin.
(4) The printing pressure is not true, and the ink transfer performance of the roller is poor.
Approach
(1) Check the printing pressure, ink roller performance, and pad.
(2) The amount of ink should be appropriate. If the ink is too soft, some thick ink can be used.
(3) Replace with new ink.
Related Links
In the actual printing work, white ink, gold, and silver ink are the inks that are most likely to cause stacking faults.
Expert tips
There are many factors that cause stacking faults. Offset press operators must be clear about the cause of the malfunction. Do not mention that the failure of the stacking ink will be caused by ink.
Deboning chicken is a time-consuming process and large meat processing plants deal with significant amounts of meat. Even if a plant employs a large number of workers to debone poultry manually, it will still be costlier and more time-consuming than utilizing deboning machines. Additionally, manual deboning has a negative effect on the freshness and quality of the meat. To solve these problems, Helper deboners provide excellent efficiency and output.
You can preprocess the poultry by cutting them into parts, and then efficiently debone separated meat by Helper deboner, which means customers only need to purchase the meat and segment it. Sunby deboners can quickly debone the meat and has less influence on the meat quality during the processing. Moreover, there are many models of deboners to meet your different demands.
After processing, minced poultry can be made into chicken nuggets, sausages, etc.. The remaining crushed bone can be made into pet feed because it contains a lot of protein to that makes for high quality nutritional supplements.
QGJ-100 300-350kg/h
QGJ-130 600-800kg/h
QGJ-160 1200-1500kg/h
QGJ-180 2000-3000kg/h
QGJ-220 3000-4000kg/h
QGJ-300 4000-5000kg/h
Meat Deboner,Bone Meat Separating Machine,Poultry Deboning Machine,Meat Bone Separator,Red Meat Deboning Machine
Helper Machinery Group Co., Ltd. , https://www.helpermeatmachine.com