· The combined walk-in constant temperature and humidity room provides the industry with temperature and humidity environment tests for large parts, semi-finished products, and finished products, such as computer terminals and automobile components. The constant temperature and humidity room is mainly composed of a control panel, a switchboard, an insulated car board, a blower, a heater, a humidifier, and a freezer. The main specifications can be divided into 6 standard indoor sizes and 24 different test specifications.
Product features: · With multiple expansion functionsThe TEMI880 controller can be connected to the computer via the RS-232C interface. It uses functions such as program design, collection of test data and records, call program execution, remote control switch on and off on the computer screen. Specially designed bottom humidity dehumidification device, the bottom condition can reach 5 ℃ / 10% RH, can be added with temperature and humidity recorder to provide actual temperature and humidity recording curve.
· Uniformity of temperature and humidity distribution
The use of multi-wing blower for strong air circulation avoids any dead corners and makes the indoor temperature and humidity evenly distributed.
· Complete safety protection device
If an abnormal situation occurs, the controller will automatically display the fault status on the screen, turn off the power switch, and provide troubleshooting methods. Product Specifications:
Bedroom furniture, sometimes called a bedroom set or bedroom suite consists of a group of furniture in a bedroom or sleeping quarters. Pieces of furniture referred to as bedroom furniture usually include: beds, wardrobes, dressers, chests, nightstands, armoires, vanities, trunks, and mirrors. There are also many variations of these pieces as furniture styles have changed through time and as individual manufacturers have put their own spin on them.
Bedroom furniture is predominantly made of wood, but many bed frames are made of various metals as well. Bed frames include but are not limited to bed rails, foot-boards and head-boards. Foot-boards and head-boards are usually made up of a few materials including wood, leather, paint & other various fabrics. Steel or iron is usually used for bed rails. Bed frames are most commonly built with support for a head-board.
Knock down fittings are usually used for locking in the bed rails and frames to the bed posts. Knock down fittings are very easy to take apart. A few types of knock down fittings include: Hook with pin fastener: mortise slots are cut in a vertical manner Hook with plate fastener: eye plates are used instead of pins.
Bedroom Furniture,Bedroom Nightstands,Bedroom Furniture Sets,Bedroom Chest Of Drawers
Jinan Tri-Tiger Technology Development Co., Ltd , https://www.jinanfurniture.com