Solid wood cabinet door refers to the surface of solid wood, the material of which has solid wood composite board and EGGER board. These two types are selected as the material of solid wood cabinet door board, mainly because the medium density board is not environmentally friendly and the screw cannot be locked twice. The bulky and medium-density raw materials are scrap crushing, waste paper and glue making, which can not meet the environmental protection standards. Therefore, the choice of solid wood and EGGER, the solid wood cabinet door made of solid wood has the effect of returning to nature and returning to the original. The style is mostly classical. The type, the lace angle treatment and the color of the paint have higher requirements on the process and can better express the classical style. It is mainly made of cherry wood, walnut, and oak. Fresh and natural materials, natural and chemical-free, Oubang cabinets are based on solid wood. The combination of Chinese and Western styles not only absorbs the advanced design of Western cabinets, but also preserves the essence of traditional Chinese food culture; the style is simple and natural, dignified and elegant. The craft is vintage and old, the wood grain is clear, retains the traces of years of attachment, and reflects the true sense of tailoring. Solid wood furniture is not only fashionable but also healthy. It is the furniture of choice for modern urbanites who admire nature.
In the "General Technical Conditions for Wood Furniture", the wooden cabinets are divided into three categories: solid wood cabinets, wood-based cabinets and integrated wood cabinets. The comprehensive wood furniture refers to the furniture made of a mixture of solid materials and wood-based panels.
Substrate refers to the material used to make the main parts of furniture, also known as the main material. The main components refer to the components in the furniture that support, load and longitudinally separate.
The main components of table furniture include table tops, drawers, door panels, side panels, tripods, etc. The main components of cabinets include panels, roof panels, side panels, partitions, floor panels, and footrests. The main components of wood sofas and chair stools include Seat, armrests, backrests, feet, etc.; main components of bed furniture include bed screens (high screen, low screen), bed decking, etc.
Look, knock, smell a few tricks to recognize the solid wood cabinets Although the national standard for the general technical conditions of wooden furniture in May 2009 has been officially implemented, the concept of solid wood furniture has been further standardized, but in the specific purchase, many consumers will face The "confusion concept" of the sellers. In fact, consumers can not only correctly understand solid wood furniture by understanding the standards, but also can grasp some simple methods of identification, in order to eliminate the misleading situation when choosing solid wood furniture.
Look at the surface texture and the solid wood furniture has a natural color difference, its color and texture have certain differences, the appearance of the furniture of the solid wood skin is very small, its texture is clear and even better than the whole solid wood furniture. Consumers can use the texture and knots of solid wood to see the corresponding positions on the exterior and back, respectively. If the correspondence is good, it is a pure solid wood cabinet door. In addition, look at the knot is also a good way to identify pure wood: look at the location of the side of the scar, and then find the corresponding texture on the other side.
The use of wood cross-section for the recognition of furniture combined with wood and wood, in simple terms, is generally in the large frame of the wardrobe frame and laminate, drawer inner panel and so on. If the manufacturer puts the solid wood skin on the artificial board, although the surface is smooth and the durability is improved, the two sides of the board will be found to intersect the texture wood grain, which is not the normal growth direction of the tree. This is the main identification method.
When looking at the position of the nail hole during installation, some frames are made of solid wood, side panels, shelves, etc., which are made of thin wood veneer particle board or medium density board. The center position of the board is actually plywood or various waste wood. This kind of furniture is difficult to identify when looking at the sample, but when you install it after entering the field, you can see the position of the nail hole. If the particle board has wood chips, the MDF will be pulpy. Consumers can use this feature. Identification.
Using the feel and smell to identify the consumer can tap a few times on the wood surface, the solid wood material will give a crisper sound, while the artificial board sounds low. In addition, the solid wood skin feels very textured, and the general artificial paper skin feels dry.
The most common but very effective method is to smell the smell of furniture at close range. Most wood has the aroma of tree species, pine has a rosin flavor, cedar has a light fragrance, and eucalyptus has a distinct eucalyptus taste, but fiberboard and MDF have a strong pungent odor, especially in cabinet doors or drawers. Inside, it smells easier to distinguish.
In the "General Technical Conditions for Wood Furniture", the wooden cabinets are divided into three categories: solid wood cabinets, wood-based cabinets and integrated wood cabinets. The comprehensive wood furniture refers to the furniture made of a mixture of solid materials and wood-based panels.
Substrate refers to the material used to make the main parts of furniture, also known as the main material. The main components refer to the components in the furniture that support, load and longitudinally separate.
The main components of table furniture include table tops, drawers, door panels, side panels, tripods, etc. The main components of cabinets include panels, roof panels, side panels, partitions, floor panels, and footrests. The main components of wood sofas and chair stools include Seat, armrests, backrests, feet, etc.; main components of bed furniture include bed screens (high screen, low screen), bed decking, etc.
Look, knock, smell a few tricks to recognize the solid wood cabinets Although the national standard for the general technical conditions of wooden furniture in May 2009 has been officially implemented, the concept of solid wood furniture has been further standardized, but in the specific purchase, many consumers will face The "confusion concept" of the sellers. In fact, consumers can not only correctly understand solid wood furniture by understanding the standards, but also can grasp some simple methods of identification, in order to eliminate the misleading situation when choosing solid wood furniture.
Look at the surface texture and the solid wood furniture has a natural color difference, its color and texture have certain differences, the appearance of the furniture of the solid wood skin is very small, its texture is clear and even better than the whole solid wood furniture. Consumers can use the texture and knots of solid wood to see the corresponding positions on the exterior and back, respectively. If the correspondence is good, it is a pure solid wood cabinet door. In addition, look at the knot is also a good way to identify pure wood: look at the location of the side of the scar, and then find the corresponding texture on the other side.
The use of wood cross-section for the recognition of furniture combined with wood and wood, in simple terms, is generally in the large frame of the wardrobe frame and laminate, drawer inner panel and so on. If the manufacturer puts the solid wood skin on the artificial board, although the surface is smooth and the durability is improved, the two sides of the board will be found to intersect the texture wood grain, which is not the normal growth direction of the tree. This is the main identification method.
When looking at the position of the nail hole during installation, some frames are made of solid wood, side panels, shelves, etc., which are made of thin wood veneer particle board or medium density board. The center position of the board is actually plywood or various waste wood. This kind of furniture is difficult to identify when looking at the sample, but when you install it after entering the field, you can see the position of the nail hole. If the particle board has wood chips, the MDF will be pulpy. Consumers can use this feature. Identification.
Using the feel and smell to identify the consumer can tap a few times on the wood surface, the solid wood material will give a crisper sound, while the artificial board sounds low. In addition, the solid wood skin feels very textured, and the general artificial paper skin feels dry.
The most common but very effective method is to smell the smell of furniture at close range. Most wood has the aroma of tree species, pine has a rosin flavor, cedar has a light fragrance, and eucalyptus has a distinct eucalyptus taste, but fiberboard and MDF have a strong pungent odor, especially in cabinet doors or drawers. Inside, it smells easier to distinguish.
Easter Party Decorations,Outdoor Decoration Balloons,Indoor Decoration Balloons, Graduation Day Balloons
Xiongxian Tonghai Latex Products Co., Ltd , https://www.tonghaiballoon.com