When printing PVC adhesive materials with an offset press, the ink adhesion is small and the back of the PVC adhesive materials is always sticky.
The main reason for this problem is due to the poor absorption of PVC ink. It is very difficult to dry completely by volatilization of ink, especially when printing a large area on the ground, the drying time will exceed 48 hours, and the adhesion of the ink is very small, which can be wiped off immediately.
Since there are few special inks for printing PVC materials, it is necessary to use ordinary inks to print PVC stickers. Through continuous practice and exploration, we have summarized an economical and practical method, interested colleagues may wish to try.
Use bright light quick-drying ink, add 3% red dry oil, 5% Zhongya brand Moshen, and use varnish instead of adjusting oil to blend until it is suitable for printing. The addition of Moshen has a significant effect on preventing the back side from sticking, and the addition of varnish improves the ink drying speed and ink adhesion. We use this method to print a batch of bottled water trademarks, which are of good quality and have been well received by customers.
The electric patient lift realizes the safe transfer of paralyzed or injured patients or the elderly between beds, wheelchairs, seats, and toilets, which greatly reduces the work intensity of nursing staff, improves nursing efficiency, and reduces nursing risks. It can solve the movement, weighing and positioning control of the DPS patient's body position for the elderly, the disabled, the paralyzed patients, and the bedridden patients.
Features of medical Transfer Patient Lift
The caster legs can be adjusted arbitrarily within the range of 0°-38°, which is suitable for the angular needs of various wheelchairs, seats, toilets and hospital beds.
The height between the pillar and the lifting rod of the electric lift can be adjusted as needed (adjustment distance 0mm-50mm-100mm), and it can be lifted from the ground to a suitable position.
The electric lift has a safety emergency stop device.
During the lifting process, the patient can rotate 360° arbitrarily in order to obtain the best posture during transfer.
The push handle of the electric lift conforms to the principle of dynamics, which is convenient for pushing forward and backward or moving and rotating sideways.
The rear wheel is equipped with a brake device to prevent the lift from sliding when the patient is lifted, causing unreasonable injury to the nursing staff or the patient.
Electric Patient Lift,Patient Lift Hoist,Electric Mobile Patient Lift,Electric Sit To Stand Lift
Jiangmen Jia Mei Medical Products Co.,Ltd. , https://www.jmjiameimedical.com