Wardrobe sliding sliding door installation points you know a few

There are many advantages to sliding the sliding door in the closet. For example, it can be dustproof, and it can also separate the space and increase the privacy of the wardrobe. Then, do you know about the installation and sliding of the wardrobe?

The common problem with sliding doors at home is sinking and deformation, which is caused by excessively large sliding doors or poor quality of the track. We saw that blankets were laid on the ground to protect the tiles at home.

Sliding door installation is generally before and after cleaning, the owner's home is basically renovated, and the sliding door will also be wrapped with a blanket or foam soft film to avoid bumping and scratching.

To install the sliding door, first fix the rail. The top and bottom seals of the sliding door need to be fixed with fixing screws.

Next, snap the door frame into the top seal, fix it with screws, and install the pulley. In the later stage, when sliding the door, the sliding was not smooth, because the track debugging was not qualified after installation, or the plastic pulley was used.

Finally, the edge band is debugged and installed, which reduces the noise of sliding the door and increases the sealing effect.

How to debug the wardrobe sliding door installation?

Check the pulley and track for damage and deformation; whether the pulley is tightened, whether the left and right sides of the door slide parallel; whether the movable door wheel and the glass have foreign objects stuck; the above phenomenon should be replaced in time.

If none of the above is true, check whether the upper and lower rails are installed in place, check whether the distance between the upper and lower holes of the glass is deviated, or add lubrication to make the door smoother.

For more information about furniture, please pay attention to Xianghe Furniture City official website http://