Although the sweeping robot provides great convenience for our life, as a new product, once the anti-life failure will cause headaches, what are the faults of the sweeping robot ? The following decoration home decoration network Xiaobian will bring you common faults of sweeping robots for your reference.
Â
What are the common faults of sweeping robots?
The sweeping robot is faulty 1. The fan does not turn: press the start button to start, the fan and brush of the machine will stop for one second, and the wheel will keep turning. The fan and brush will restart three times. After three restarts, the machine will pause and the buzzer will sound an alarm.
Solution : 1 Check if the fan is deformed and there is no abnormal sound of the wind blade. If so, replace the fan module. 2 Unplug the fan cable and press the start button. If there is no alarm, you need to replace the fan module. 3 Unplug the fan cable and press the start button. If the machine still has an alarm and does not check for an abnormality, you need to replace the motherboard.
Sweeping robot failure 2, the main tooth box abnormal sound: press the start button to start, the machine's fan and brush will stop for a few seconds, the wheel will keep turning, the fan and brush will be restarted three times, the machine will pause after three restarts. The buzzer sounds an alarm.
Solution : 1 Clean the winding debris on the main brush and the side brush. 2 Unplug the cable of the brush box and press the start button. If there is no alarm, you need to replace the main box. 3 Unplug the cable of the brush box and press the start button. If the machine is still alarming, you need to replace the motherboard.
Sweeping robot failure 3, in the running machine temporarily: press the start button to start, the machine will pause for a few seconds, the fan, brush and wheel will not turn, to restart three times, the machine will pause after three restarts, the buzzer will sound alarm.
Solution : 1 If it is a rough carpet floor, the resistance of the machine is too great. Put the machine on the floor and try it. 2 Unplug the left and right wheels to start the machine to check if there is such a bad phenomenon. If there is a problem with the motherboard, you need to replace the motherboard. If the wheel is pulled out, it means that the wheel is a problem and the wheel needs to be replaced.
Sweeping robot failure 4, no boot: press the sweeping robot's switch button can not be turned on.
Solution : 1 The machine has been placed for too long, the battery is dead, and it needs to be charged by the charging stand or adapter. 2 Please check if the battery cable and the shell connection cable are loose and fall off. 3 If the machine switches frequently, please check if the button switch is damaged. 4 When it is not the above reasons, you need to replace the motherboard.
Sweeping robot failure 5, no shutdown: After sweeping the robot, press the switch button, you can not shut down.
Solution : 1 If the machine switches frequently, please check if the button switch is damaged. 2 Check if the cable connection cable is loose or loose. 3 If the abnormality is not detected, the motherboard needs to be replaced.
Sweeping robot failure 6, the brush does not turn: the main brush turns, the side brush does not turn; the main brush and the side brush do not turn.
Solution : 1 Check if the main brush is rotating. If the main brush is rotating, check if the side brush is wrapped with foreign matter. 2 If the main brush and the side brush can't be rotated, then loosen the main tooth box screw to see if the start is rotating. If it can't be rotated, only the main tooth box can be replaced.
Sweeping robot failure 7. No matter whether the sweeping robot is turned on or off, the fan /brush is always turned: after the shutdown, the fan/brush still rotates.
Solution: Replace the motherboard of the sweeping robot.
The sweeping robot is faulty 8. The left/right wheel does not turn: after the machine is started, the left/right wheel does not rotate, and the main brush/fan works normally.
Solution : 1 Check the left and right wheels to see if any foreign objects are stuck and the socket is loose. 2 If only one wheel does not turn, exchange the left and right wheel sockets to start the machine to check if the machine is still not turning. If it is, the wheel that does not turn is broken, you need to replace the wheel. If not, you need to replace the motherboard. 3 The machine starts to walk sideways, pauses after stopping or hitting the wall, indicating that the motherboard is broken and needs to be replaced.
Sweeping robot failure 9. Remote control is not sensitive: The buttons on the remote control can sometimes be remotely controlled and sometimes cannot be remotely controlled.
Solution : 1 Check if the voltage of the remote control battery is too low. 2 The machine cannot be placed in front of the opened charging stand and virtual wall (cannot be remotely controlled within 3M from the charging stand and virtual wall). Please unplug the charging stand and turn off the virtual wall before performing remote control. 3 Turn on the charging stand, let the machine switch to find the charging seat mode to run, see if the machine can automatically turn when looking for the charging stand, can turn the circle to indicate the problem of the remote control, if it can not turn, it means that the machine receiving head has a problem, replace keyboard.
Sweeping robot failure 10, remote control has no effect / does not find the charging cradle: the keys on the remote control have no effect after the power on; the machine does not circle when looking for the charging cradle.
Solution : 1 When the remote control has no effect, if the cradle is found normally, it means that there is a problem with the remote control itself. Check if the battery has power and the battery voltage is normal. A battery that has no power needs to be replaced with a battery of the same specification. If the machine does not rotate when looking for the charging stand, it means that the receiving head of the machine keypad/display panel is defective, and it is necessary to change the keypad or the receiving head. 2 The machine is only remotely controlled after being manually turned on. When it is manually turned off, it cannot be remotely controlled.
The above is what Xiaobian brought to you. What is a sweeping robot? How about sweeping the robot? I believe that everyone has a basic understanding of sweeping robots after reading this article. If you want to know more about decoration consultation, please click to enter the decoration knowledge channel .
More related wonderful reading:
How to maintain the sweeping robot? Sweeping robot maintenance tips
What is the principle of sweeping robot? Sweeping robot charging method
How to use the sweeping robot? Sweeping robot instructions
What is the price of the sweeping robot? Sweeping robot price list
Which brand of sweeping robot is good? Sweeping robot brand ranking
Yuyao Shenghe Electrical Appliance Co., LTD , https://www.yyshenghe.com