[ Chinese wardrobe net ] 1. When the surface of the custom closet is dusty, it should be dusted with a donkey or a soft cloth. If there is stain on the surface, it should be cleaned with sand wax. It is best to do regular care according to the actual situation. If you have the conditions, you can often apply oil to the veneer. Metal parts can only be wiped gently with a dry soft cloth. Do not use chemical cleaner or acidic liquid. If it is found to have black spots on the surface, it can be wiped with a little kerosene.
2, try to avoid damage to the ring or scratch the surface of the custom wardrobe, if the surface is slightly scratched and bruised, can be rubbed with a mixture of cloth soot and lemon juice or fried oil, dry and waxed; if the scratch is deep If the bruise is serious, you need to reconcile the same color paint.
3. Regularly check the connecting parts and find that the looseness is tightened in time. If the disassembly or assembly is caused by disassembly and assembly, the relevant custom wardrobe brand store should be notified in time to assist in handling.
4. The door should be kept clean at all times. There should be no debris or dust in the track to prevent heavy objects and sharp objects from hitting the track. When cleaning, use a semi-wet rag to wipe the cabinet and cabinet door. Never use corrosive detergent. The dust of the track can be cleaned with a vacuum cleaner or a small brush, and the metal parts such as the frame and the tie rod are wiped with a dry cloth.
5. When using, pay attention to balance, avoid placing it in a place with high temperature, strong vibration, humidity or direct sunlight, and keep the room ventilated. Avoid contact with corrosive liquids on the surface of the whole wardrobe , such as sprinkling, banana water, gasoline, water, nail polish, strong acid, strong alkali and so on.
Moldy treatment
Instant cleanup
When we see mildew in a custom closet, we must first clean up the moldy area. Generally, wipe it off with a dry paper towel, or brush it with a dry brush to clean the moldy area. If the cleaning is not clean, you can wipe it with a damp cloth, and it is often very convenient to remove the mildew.
Lacquer prevention
If you find mold, in addition to cleaning the mold with a cloth, we need to brush the varnish again, so that it can effectively prevent further mold. Moldy is mostly caused by the problem of paint, so we can also use the rain forest to clean, then wipe it with a clean cloth.
Keep dry
The air is damp and prone to mold, so we can put some quicklime in the house, not only can effectively prevent moisture, but also have the effect of disinfection. If the moisture in the closet is too heavy, you can put a tungsten light bulb in the closet and open it when it is wet. It can effectively reduce the moisture in the closet and keep the closet dry.
Air circulation
After moldy mold enters our home, it will cause some respiratory diseases. In order to prevent this, you can put some desiccant in the closet, which can absorb the excess water in the closet and make the wardrobe more dry. At the same time, we can put some orange peel in the closet, which can also play the role of clear and environmental protection. At the same time, we should pay attention to the frequent ventilation and ventilation. Try not to use the humidifier indoors to prevent excessive moisture and affect the use of the wardrobe. .
Barber Scissors Set,Pet Scissors Set,Small Pet Scissors,Fishbone Teeth Pet Scissors
Zhangjiagang Mister Tools Co., Ltd , https://www.msscissors.com