[ Chinese wardrobe network ] The first is the board. The board is the main component of the overall wardrobe , and its quality directly determines the quality of the wardrobe . The wardrobe panels on the market mainly use wood-based panels, and there are few solid wood panels. Wood-based panels are further divided into splints, particle boards, and fiberboard. Among them, fiberboard has high density, medium density and low density. MDF: It is made of wood fiber or other plant fiber. After cooking, it is ground into fine fiber and added with appropriate amount of adhesive. It is pressed under a certain temperature and pressure. High density and high strength. Particle board: the proverb "chip board", which is processed into fine particle shavings and added with appropriate amount of glue, pressed at a certain temperature and pressure. The density is not high and the strength is small.
The plate is full and thick, and the density is sufficient to ensure the durability of the wardrobe. The cabinet board for wardrobes must have the national authoritative test report, and must comply with the national mandatory standard GB18584-2001. The formaldehyde emission is ≤1.5mg/L, and the water content is between 5-11. Whether the plate is strong or not determines the cabinet. The service life, the thickness standard should be 18cm, which is not easy to deform and has good stability. The density standard is 0.6-0.9g/cm3, and the service life should be more than 15 years.
Followed by the edge banding, the edge of the board is an important standard for the fineness of the wardrobe process. The process directly affects the quality of the wardrobe, and whether there is any unevenness and lifting phenomenon on the edge of the seal, the good edge seal should be tightly stitched with the whole piece of sheet. The edge of the machine is generally uniform, no black lines and sawtooth marks are visible, and the hand-sealing will be somewhat rough and will hang the clothes.
Finally, the hardware accessories, the pulley of the brand wardrobe is generally equipped with balls, with non-drying grease, so the push and pull is smooth and flexible. And with such a pulley, the weight of the wardrobe is large, and it is more resistant to pressure and wear. At the same time, good pulleys are often designed with anti-slip devices to ensure the safety of the doors when sliding. In addition, in the acceptance of the overall wardrobe, you need to pay attention to the following aspects, one is whether the cabinet panel has no color difference; the second is the gap at the joint, generally the gap should be less than 0.1mm; the third is the pants rack with or without anti-slip treatment, After the anti-slip treatment, the pants can be prevented from slipping when the pants rack is pulled; the fourth is that the clothes rails must be integrally formed, so that they can bear enough weight; the fifth is that the drawers and the drawer work must be meticulous and smooth, and the structure is firm.
Advanced Vacuum Dough Kneading Technology
Vacuum Dough Kneader/Vacuum Kneader:
This machine developed by our company is the most advanced domestic kneading machine. It is mainly applicable for making various flour products. Its mixing leaves can be adjusted according to the characteristic of wheat flour. Many mixing leaves developed by our company have been granted the national patents. This vacuum kneading machine is under the vacuum condition imitating the manually kneading to quickly form the gluten and proportionate the protein structure. The kneaded dough has better extension and elasticity, more smooth surface, and better looking than any others.
With human-machine interface and PLC control, the machine has high automation level and is convenient to operate. After inputing the process procedure, the machine will complete the whole kneading process automatically. Also it can be manually controlled to satisfy different demands of production.Flour Mixer,Mixing Machine For Baking,Flour Mixing Machine,Bread Dough Mixer,Vacuum Dough Kneader,Vacuum Kneader
Helper Machinery Group Co., Ltd. , https://www.helperfoodmachiney.com