[ Chinese wardrobe net ] Now there are many kinds of materials for the wardrobe . We can choose which kind of material to use to make our wardrobe according to our own needs, but the materials we choose should consider its characteristics, price and so on. Factor, Xiaobian is here to tell you about what materials are used in the wardrobe, and I hope that it will help you to build a wardrobe.
The first name of the wardrobe, composite solid wood, moisture-proof board, solid wood paint-free board: both moisture-proof, environmentally friendly, and cost-effective. The national cabinet products have experienced more than ten years of development. More than ten years of experience can be used to determine the wardrobe's moisture-proof board is the best choice! The moisture-proof board of the cabinet can be used in heavy and humid environment, showing its high quality. Due to the more fragile surface, the requirements for production equipment are higher. Nowadays, the new wall is decorated and painted, and the wall will have a small amount of water. After the whole wardrobe is installed, it cannot be ventilated, and the back part of the wardrobe needs a plate with better moisture resistance. The moisture-proof board is immersed in water. Because of the long wood fiber and the green moisture-proof agent, the immersion expansion will not expand until it is soaked to a certain extent. Therefore, the moisture-proof board of most brand cabinets is the main material of the cabinet, which is reasonable.
What kind of material is good for the wardrobe? The regular manufacturer produces particleboard and MDF: the particleboard produced by the same material is more environmentally friendly than the MDF. In fact, the reason is simple: molding wood, no glue, environmental protection is definitely nothing to say. If the amount of glue used to cut into 1 piece and 5 pieces is different, the less glue is, the more environmentally friendly it is. MDF is also called MDF. It is pressed by wood powder and has better flatness. It is more suitable for boring and milling. It is usually used to make door panels, such as baking varnish and moulding (blistering). There is also a softer material for MDF, which is less prone to blasting when sealing, and easier to process, so many small factories use medium denier. In terms of moisture resistance, the particle board is much less resistant to moisture than the moisture-proof board, and the green core moisture-proofing agent is less. If it is in a humid environment for a long time, the wood is prone to mold and decay. The raw material of the MDF is wood flour. The MDF is soaked in water and will swell like a cake.
The third place in the wardrobe, the small factory to produce the particle board at a low cost: Most small manufacturers consider the cost, generally use particle board (that is, solid wood particle board), using ordinary glue, the cost is the lowest among the three materials.
The fourth place of the wardrobe, the ecological board: (refers to the ecological board produced by the small workshop) large core board or sandwich board plus double-sided paste tri-ammonia surface! Quality: sandwich board (commonly known as blockboard, wood board ) is a plywood with solid wood core, which cuts the logs into strips, splices into cores, and is made of outer surface materials. The force of the whole board comes from the thin two-layer outer veneer, and the middle is the wooden block splicing. The substrate is basically free of force and is easily broken and deformed. Most of the plates are made of fir for one or two years. As long as the pieces are broken with fingers, the nail holding power is several times lower than the national standard.
Environmental protection: The advantage of the ecological board is that the substrate looks good. It feels like wooden blocks. The name of the ecological board is also very good. It also has the feeling of environmental protection. Everyone knows that the environmental protection standard of the board is mainly glue, and the environmentally friendly E0. The cost of E1 glue is very high. The small-scale factory will never use this kind of environmentally-friendly glue, all of which use industrial glue, and the cost is relatively low. Almost all large-scale brands in the national furniture market will not use ecological boards or fir boards. Before 2005, almost all the new homes were decorated with sandwich panels, almost all of which exceeded the standard. Since the rise of the large wardrobe brand, the use of moisture-proof panels and MDF, it is rare to hear environmental standards.
After the wardrobe is purchased, pay attention to the maintenance work of the wardrobe during the use. Only the wardrobe made of good materials can be used, and the wardrobe can be used for a long time.
We are professional of manufacturing all kinds of shower mixers for almost 20 years. Regarding to the shower mixer material, we can produce brass shower set and stainless steel shower set. Stainless steel shower set is cheaper price,most of them are for commercial projects. Brass shower faucets are for high level market. And nowadays, YUFA mostly produce hot and cold water shower mixer instead of only cold shower faucet. In order to meet people's high requirement, YUFA can both offer common hot and cold shower mixer and thermostatic shower mixer. Welcome to know more about our Shower mixer, let's talk more about it.
Shower Mixer,Mixer Showers,shower mixer set,Shower Mixer Systems
Kaiping Yufa Sanitary Ware Co.,ltd , https://www.yufabathroom.com