In the renovation of new homes, many owners have encountered embarrassing things: after the renovation, it seems that all aspects of the decoration have achieved the original design effect, but once the acceptance is completed, or after a short period of time, it is found that there are many projects. Unexpected problems, such as wall paint peeling, tile hollowing, wall cracking, etc. According to industry analysts, the emergence of these problems is mainly related to the lack of detail in the decoration and the irregular construction. To avoid the emergence of these problems, the owner should supervise the construction party to strictly regulate the construction during construction.
The wall should be painted as a whole to avoid chromatic aberration
Before painting the wall paint and paving the floor tiles, be sure to do the ground layer or the ground floor. The base treatment of the new house can be polished with coarse sandpaper, while the wall of the old house needs to be removed from the putty layer before the next process can be carried out. If this method is not adopted, the wall surface will be uneven, and the wall paint will have a color difference after painting; the wall paint will be discolored, cracks or even peeling.
In the paving of wall tiles and floor tiles, the main concern is that the tiles cannot be directly placed on the surface of lime mortar, lime paste or lime slurry, and the base layer must be cleaned before being laid. The bonding mortar used between the tile and the substrate shall be formulated in strict accordance with the construction standards and proportions, that is, the purity of the cement is high, or a new type of tile adhesive is used, which cannot be randomly adjusted. When painting the wall paint, be sure to pay attention to whether the wall putty layer is even and smooth, whether the grinding and rolling coating are in place.
Wall paint is a common home decoration material. It can be painted, rolled or sprayed during the construction process. Wall paints generally need to be coated twice or more to be qualified. If the construction workers are not serious in the construction, the coating is not thick enough, and the wall surface often has chromatic aberration, especially the darker wall paint is more prone to such problems. The current wall paints are all water-soluble paints. Before use, water should be added. After the blended wall paints are used up, the paint of the same color should be painted once. If the wall needs to be repaired after the construction is completed, the entire wall should be repainted.
Water and electricity pipelines should be protected from blockage
After the renovation, there was a blockage problem in the sewage pipe at home, which was actually caused by irregular management in the construction. Some workers may unconsciously get concrete fragments containing cement and sand into the sewers, which will result in poor sewer pipes in the future.
The owner must strictly supervise the supervision work and do a good job in sewer pipe protection. After the completion of the work, fill all the wash basins, kitchen sinks and bathtubs with water to see if the water is unobstructed and whether there is leakage in the pipeline. After all these steps are completed and there is no problem, you can count pass the inspection.
Since the current circuits are all dark lines, they are highly concealed. Some owners use electrical appliances after they have checked in, especially when some appliances that consume a lot of electricity are hot and hot. Some inexperienced owners often think that high-power appliances are causing disasters. In fact, this is not the case. In such a situation, it is very likely that the electrician does not follow the construction requirements when installing the sockets, switches and lamps.
In this regard, Xiao Bian reminds the owner that in the construction must strictly require the electrician to operate according to the operating procedures, after all the switches and sockets are installed, be sure to use the power supply to observe whether there is heat, so as not to bring it in the future. Unnecessary loss. If you find a problem, you need to replace the wire or socket on site.
It is understood that in the home decoration construction, most of the wires are worn in special pvc pipes, buried in the walls. In order to avoid these hidden dangers, it is best for the owner to purchase brand-name wires according to the load of electricity, preferring to use thicker wires. After the power-on inspection, the plumber or the decorator should also leave a “pipeline diagram†for future inspection and maintenance.
Kiki
AUTRENDS INTERNATIONAL LIMITED , https://www.petspetsdoggze.com