In the offset printing process, the printed matter is a common quality problem, which causes the printing ink to be smashed, leaving a graphic imprint similar to snowflake dots; the heavy ones cause the printing products to stick to each other, and the separation is difficult. Seriously affect the quality of printed products, and even cause the printed products to be scrapped. Based on my long-term work experience in offset printing, the author has summarized seven common prints that are easy to stick, and analyzed the sticking mechanism one by one, and proposed a coping strategy.
Seven common prints are easy to stick
1. Gold and silver ink printing
Gold and silver inks are formulated from special binders and gold and silver powders, and the penetration on paper is much smaller than ordinary inks. When printing characters and patterns using gold and silver inks, the oxidized and conjunctiva on the surface of the paper is slow, and the drying time required is long, which tends to cause the printed matter to be dirty.
2. Field printing
In order to print the solid effect on the paper, it is necessary to increase the amount of ink, but when the paper is saturated with ink, the excess ink will accumulate on the surface of the paper, so that the oxidized and conjunctival speed of the ink on the surface of the paper becomes slower, and the required drying time becomes longer. Long, which makes it easy to make the prints dirty.
In addition, when printing character hair or printing characters by four-color overprinting, since the total amount of ink per unit area is saturated, the ink layer is thick, which is particularly likely to cause the printed matter to be dirty. According to statistics, in the case that all printed products are dirty, printing a character's hair and using four-color overprinting to print the text causes a large proportion of the printed matter, which cannot be underestimated.
3. Special paper printing
Special paper refers to paper other than conventional coated paper, offset paper, white paper, etc., such as the brands of Gretel, Glas, Pure Wood, and Meisha used by the author's company. Due to the special papermaking process, the special paper makes the printing effect unique, which is favored by some users, so it is more and more applied to the printing of the cover and the inner page. However, the porosity of the surface of the special paper fiber is low, and the adsorption of the capillary to the ink is weak, which causes the ink to not easily penetrate into the inside of the paper, which easily causes the printed matter to be dirty.
4. Improper printing pressure
In order for the ink to transfer well to the paper, the printing pressure must be appropriate. The relationship between printing pressure and ink transfer amount is shown in Fig. 1.
As can be seen from Fig. 1, the AB segment indicated by the broken line is the irregular phase of the printing pressure and the amount of ink transfer; the BC segment is the phase in which the ink transfer amount increases as the printing pressure increases; the CD segment is printed. The feasibility phase of pressure and ink transfer is relatively constant; the DE segment is the stage where the printing pressure begins to be too large and the ink transfer amount begins to be unbalanced; the EF segment is the stage where the printing pressure is too large and the ink transfer amount is seriously unbalanced. Among them, P3 is the ideal printing pressure point, and P4 is the critical point of printing pressure.
As can be seen from the above analysis, the amount of ink transfer varies with the printing pressure. In actual printing, if the printing pressure is too large or too small, the ink can not be transferred well, and the dot can not be perfectly restored, making the color chasing difficult. In order to achieve the proof effect, the operator usually increases the amount of ink, which will cause the print to become dirty.
COMFORT AND SECURITY: The medium dog bed's raised rim creates a sense of security and provides head and neck support, while the super-soft filling offers joint and muscle pain relief .
HIGH QUALITY MATERIAL OF PET BED: Cozy small dog bed is made of soft fabric, non-toxic and environmental friendly. Stuffed with eco-friendly fiber keep the dog bed warm and comfortable, provide a comfortable, healthy sleeping environment, aslo can maintain its original shape for a long time.
EASY CARE: Orthopedic pet bed machine washable as a whole. Gentle cycle and thoroughly dried in dryer directly after washing and do not Air dry. Please use your hands to pat, shake the dog bed and wait for 1-2 days to wait it back to fluffy status before using !
For Small Medium Large Dogs Cats - perfect for most dogs,eg puppy,chihuahua,shih tzu,yorkies,pomeranian,pug,pitbull,dachshund,german shepherd,doberman,boston terrier,greyhound,shipoo,chiwawa,scotties,labrador bulldog,golden retriever
We are a Chinese pet products manufacturer, our company produces and sells various cat accessories and dog accessories, including Pet Toys , Pet Apparel And Accessories, Pet Collar And Leashes , Pet Beds And Accessories, Pet Cleaning And Grooming Products, Pet Bowls And Feeders , Pet Houses , and Pet Carriers And Travel Products, which are accepted OEM&ODM. Please don`t hesitate to contact me if you need anything.
Pet Beds And Accessories,Luxury Dog Beds,Pet Cushion,Floating Cat Bed
Jilin LOYO Pet Products Co.,Ltd. , https://www.loyopets.com