The bathtub is a large part in the bathroom space. During its installation, it is inevitable that small episodes will inevitably occur, so how to install the bathtub is particularly important, how should it be installed? Anything to pay attention to, let's take a look together, I hope to help you.
The first is to choose a bathtub of suitable size according to the specifications of the bathroom. I believe everyone will notice that the appropriate bathtub size is selected according to the size of their own bathroom, so in the early stage of installation, you must first compare the size of the bathtub and the space reserved for the bathroom.
Before installing the bathtub, the bathtub should be scrubbed clean. Remove the screws on the legs with the legs first, insert the female dial into the bathtub at the bottom of the bathtub, buckle the legs on the bathtub, attach the nuts and tighten the leveling. When the bathtub is built with brick legs, the brick legs should be built, and the cement mortar should be laid. Place the bathtub on the brick platform to find it level. If the bathtub and the brick platform do not match, use cement mortar to fill and smooth it.
When installing the water supply, when installing the long-neck water nozzle in the bathtub, if you install a cold water nozzle on the wall, first align the water outlet with a short pipe, measure the size of the short section, saw the pipe thread, and wrap the end with oil. , Screw it into the mouth of the tube, tighten it to correct it, and remove the pock. For example, when installing a hybrid water gate with a shower, remove the hot and cold water pipe plugs, use a short tube with a threaded buckle to fit into the pipe port, try to level it, screw the mixed water inlet into the protective port , Insert the key into the inlet, install it into the cold and hot water pipe mouth, proofread the size, close the mouth against the wall, and then align the mixing nozzle to the inlet, tighten the nut, try to level it, make a mark after the fit, put the mixing gate Remove, reapply the oil and install it.
When installing the bathtub, put the bathtub drain tee nut on the drain horizontal pipe, wrap the asbestos rope, insert the tee middle port, tighten the nut, install the copper pipe in the tee lower port and insert it into the drain pipe port, the lower end of the copper pipe is flanged , Put rubber pad under the bathtub bottom disc, put on putty, insert into the drain hole of the bathtub, then put rubber pad and eye ring on the outside, and apply lead oil, hemp and putty on the threaded place. Use the fork to catch the cross ribs of the water outlet, inside the water elbow. Put the overflow riser on the nut, wrap the oil packing rope, insert the top of the tee, align with the overflow hole of the bathtub, tighten the nut, and add a 1mm thick rubber pad to the elbow of the overflow pipe, put on the putty, and put the bolt through The long "I" screw in the elbow of the pipe is not loose. Wrap the oil asbestos rope at the interface between the bathtub tee and the drain pipe, twist it tightly, and seal it tightly with putty.
The above is all the content of how to install the bathtub. I hope to help you. For more exciting content, please continue to pay attention to our website.
More articles:
Considerations for the purchase of toilets
Smart bathroom Anhua smart toilet recommended
How to recommend Anwar toilet
Precautions for toto toilet installation Toto toilet installation
What, the decoration still uses his own money? ! The Qi family is decorated in installments, with an ultra-low annual interest rate of 3.55% and a maximum loan of 1 million. Apply now to enjoy the discount
If you are interested in brand cooperation, content cooperation, and advertising of this website, please send an email to :.
Bathroom door size
Food additives are substances added to food. Some additives have been used for centuries. With the advent of processed foods in the second half of the twentieth century, many more additives have been introduced, of both natural and artificial origin.
The advantages of food additives are these followed:
1. Improve the appearance of food.
2. Keep and enhance the nutrition value of food.
3. Increase the variety and conveniences of food.
4. Miantain freshness and prolong shelf life.
5. Provide leavening or control acidity and alkalinity.
Food Additives,Natural Food Additives,Food Additives Preservatives
SINOCHEM PHARMACEUTICAL CO., LTD , https://www.sinochemnutrition.com