Guangdong Aisihao Testing Equipment Co., Ltd. is a professional development, design and production of two-box thermal shock test chamber, three-box thermal shock test chamber, high and low temperature test box, low temperature impact test machine, high and low temperature box, high Low temperature alternating heat and humidity test chamber, thermal shock test chamber, constant temperature and humidity test machine, ultraviolet aging test chamber and other instruments.
Any machine repair is to be able to operate again, and maintenance can also improve the efficiency of the machine and extend the life of the machine. The maintenance of the high and low temperature impact test chamber is also the same. The maintenance efficiency of the product can be greatly improved by the maintenance, and the maintenance can also play a safety role. So from the maintenance point of view, what aspects of maintenance should pay attention to?
First, the principle that high and low temperature impact test chamber maintenance must follow
The first principle of maintenance is to re-operate the machine to prevent further failures, but do not operate the machine at will because of maintenance. In the same way, the machine must be maintained, and only the three operations of the specified operation, on-time maintenance and regular maintenance can ensure the fast and efficient operation of the machine. It is absolutely bad to focus on only one of them.
Second, maintenance must require professionals
The so-called professional is a very understanding of a thing, has a certain authority. When the product is repaired, it is also possible to understand the fault more clearly and repair it better. Therefore, professionals are loyal partners of the instrument, and their professional training should be strengthened so that they can fully understand the instrument and better repair it.
Third, high and low temperature impact test chamber maintenance must choose a professional repair factory
Not all factories can repair the machine. Some small repair factories use some simple methods for maintenance. The tools used are irregular maintenance tools, and some repairs may occur. The situation occurs, so those with a level of factory should be selected for repair.
Shijiazhuang Asa Technology Co., Ltd. , https://www.hskinlift.com