Turn on the emergency brake knob, and then press the power button on the front of the instrument. 2. Open the gas cylinder valve to open the gas source. 3. Use the oil cup to take the dehydrated sample to the score line and install it on the instrument tray as required. 4. Check and confirm that the ignition coil voltage potentiometer is adjusted to 5-6. 5. Press the key, press to select the oil cup position number to edit the sample name in sequence, press to select the oil cup position, set the expected flash point value in sequence according to the sample, and press the up and down keys to select the method Automatic. 6. Press again to start analysis. At this time, the pilot gas and ignition gas should be adjusted to meet the test requirements. 7. After the analysis is completed, use the query to analyze the results.
Spiral undated planner,Sew binding undated planner,Hardcover undated planner,soft undated planner
Lion Paper (Jiaxing) Co.,Ltd , https://www.lion-paper.com