Our high frequency pulse series electric resonance testing machine adopts a new "innovative" design:
1. The test area and test piece installation table are 1.5 times larger than the previous product
2. Dynamic displacement increased to ± 6mm
3. The frequency range is expanded to 400Hz
4. Digital monitoring system with real-time processing
5. Use carrier frequency measurement amplifier
6. Extremely high accuracy
7. Very good resistance to lateral forces (not sensitive to lateral forces), the only system in the world that can use asymmetrical fixture
8. Low maintenance requirement magnetic excitation drive fatigue strength test system
9. Various special software packages, such as:
Indefinite module package
Classified statistics according to the rain flow method
Load simulation test
10. Optimized ergonomic design
11. High test efficiency and low energy consumption
12. Two adjustable test frequency ranges
13. Add a cyclic vibration terminal using sound insulation material in the test system to improve the noise
14. Maximum load up to 1000kN
Resonance testing machine is a widely used electromagnetic excitation test system. This system can provide fatigue tests for axial, bending and torsional loads. The entire vibration system was divided into three major blocks during design. When a larger test frequency is needed, other modules can also be added for implementation. The dynamic drive is provided by a high-performance electromagnet. In the ready state, the static drive unit can be controlled manually. The loading force can be displayed on the display of the control unit. The entire test system can use force control, displacement control or strain control. The user-friendly operating system makes users more comfortable, and customized fixtures can better cope with different testing needs.
Rated load: 20 ～ 1000kN
Static load: ± 20 ~ ± 1000kN
Maximum dynamic force amplitude: ± 10 ~ ± 500kN
Test frequency: 30 ～ 115Hz
Maximum dynamic stroke: 12mm
Height: up to 3800mm
Width: up to 2340mm
Depth: up to 2000mm
Maximum allowable width of test piece: 1560mm
Maximum allowable length of test piece: 1200mm
Total weight: 2300Kg ~ 17500Kg
In addition: electromagnetic resonance high frequency fatigue testing machine; electric resonance high frequency fatigue testing machine; rear axle bending fatigue testing machine; rear axle torsional fatigue testing machine; stabilizer bar fatigue testing machine; railway wheel testing system; universal axle fatigue testing machine ; Connecting rod, piston rod fatigue testing machine; drive shaft fatigue testing machine; crankshaft bending fatigue testing machine; crankshaft rotating fatigue testing machine; spring fatigue testing machine; Rantec software; exhaust pipe fatigue testing machine; 4-point rotating bending fatigue testing machine ;
There are mainly the following kinds of intelligent tea table lifting classification:
1. Manual lift coffee table: This coffee table needs manual operation to lift. Lifting is usually done by rotating or stretching a component. The tables are cheap and simple, but they require human operation.
2. Electric lift coffee table: This coffee table needs electric drive to lift up and down. The coffee table is usually raised or lowered by a remote control or a button. This kind of end table is more convenient than manual lifting end table, but also more expensive.
3. It has functions such as boiling hot pot and heating coffee, which is more intelligent and user-friendly
Lift Coffee Table,Smart Lifting Coffee Table,Lift Top Coffee Table,Raising Coffee Table
Suzhou Herstar Medical Technology Co., Ltd. , https://www.htstandingdesk.com