According to overseas media reports, Taiwan area Cheung newly launched "FO hollow aluminum alloy turbine reducer", the machine does not take up space, has a self-locking function, can quickly stop, good protection, can be installed on many sides, no angle limit, good heat dissipation ,Easy to maintain.
When the motor and reducer are assembled, the installation space required for the direction of the output shaft is considerable. Since the shaft center setting of Xiangxin FO hollow reducer can be at right angles to the motor, it is beneficial to the miniaturization of the machine, and in particular, the parts and time necessary for many installations can be reduced, and the purpose of cost reduction can be achieved. In addition, a gear reducer generally available on the market takes about 5 to 10 seconds to stop, but it takes only 2 to 5 seconds to use the F Series to reach a standstill.
FO reducer has the following advantages: For applications where micro-retentive force is generally required (such as climbing conveyors), FO reducer has a self-locking function, which can save the cost of device brakes; the whole series of products have fixing holes on each plane The direction and angle required for installation can be selected; the FO reducer protection grade IP55 structure, good isolation for dust and water, good protection; the housing is made of aluminum alloy gravity die casting, fast heat dissipation, vortex rod , Turbine life extension, good durability.
Tel: (04)23146090
When the motor and reducer are assembled, the installation space required for the direction of the output shaft is considerable. Since the shaft center setting of Xiangxin FO hollow reducer can be at right angles to the motor, it is beneficial to the miniaturization of the machine, and in particular, the parts and time necessary for many installations can be reduced, and the purpose of cost reduction can be achieved. In addition, a gear reducer generally available on the market takes about 5 to 10 seconds to stop, but it takes only 2 to 5 seconds to use the F Series to reach a standstill.
FO reducer has the following advantages: For applications where micro-retentive force is generally required (such as climbing conveyors), FO reducer has a self-locking function, which can save the cost of device brakes; the whole series of products have fixing holes on each plane The direction and angle required for installation can be selected; the FO reducer protection grade IP55 structure, good isolation for dust and water, good protection; the housing is made of aluminum alloy gravity die casting, fast heat dissipation, vortex rod , Turbine life extension, good durability.
Tel: (04)23146090
The Height Adjustable Desk can complete the direct switching between sitting and standing office in the shortest time, and can find the most suitable height.
According to the lifting mode, it can be divided into manual, Electric Standing Desk and Pneumatic Standing Desk.
The Electric Standing Desk is divided into two legs standing desk, Three Leg Standing Desk and Four Leg Standing Desk, which is also called back-to-back standing desk. This back-to-back standing desk is a double desk with a screen connected in the middle to ensure personal privacy and beauty.
Four Leg Standing Desk,Durable Electric Standing Desk,4 Legs Electric Standing Desk,Height Adjustable Quiet Standing Desk
CHEX Electric Standing Desk , https://www.zjqxhdesk.com