Bar code printers are one of the office supplies and consumables. The correct use of the bar code printer effectively extends its service life. The following is provided by Xiaobian, the safety and precautions for the use of bar code printers:
1. Bar code printers may interfere with radio, TV and other communication products when working, so please remove these products to avoid signal interference;
2. Place the barcode printer on a level, sturdy table or flat surface;
3. The barcode printer should be away from places with moisture, water and high temperature;
4. Please refer to the specification label on the back panel of the barcode printer to make sure that the power supply specification you are using is correct. Make sure that the power supply voltage switch (110V/230V) matches the power supply voltage in your area. Otherwise, the machine will burn out or Not working properly;
5. When the machine is connected to the power supply, do not open the chassis;
6. The barcode printer can not be disassembled or disassembled, otherwise it will lose the warranty and cause damage;
7. Before cleaning the barcode printer, please cut off the power of the barcode printer. Do not use liquid or spray cleaner to clean the barcode printer. Wipe the barcode printer with a soft cloth or cotton.
8. Do not use a bar code printer at room temperature above 40 degrees Celsius, otherwise the bar code printer will be damaged;
9. The heat dissipation holes around the barcode printer should be blocked and affect the heat dissipation;
10. The power cord of the barcode printer should be placed in a suitable and safe place. The voltage and current that the power cord identifier can carry should be greater than the voltage and current identified by the printer;
11. Do not drop any liquid into the cooling holes of the printer to avoid fire or short circuit.
12. When the barcode printer is not used frequently, disconnect the barcode printer from the host and the power cable to avoid damage to the barcode printer due to transient overload voltage.
Transfer Patient Lift,Bariatric Patient Lift,Patient Lifting Device,Battery Powered Patient Lift
Jiangmen Jia Mei Medical Products Co.,Ltd. , https://www.jmmedicalequipment.com