When the operator is loading and unloading the base paper, because some operation details are not handled properly, it is easy to cause the loss of the base paper. This article focuses on a few small details that are easily overlooked during the loading and unloading of base paper to reduce the loss of base paper.
The most frequent operation of the wet line personnel of the tile line is to replace the base paper. Many single-watt machines need to change hundreds of base papers a day. In the process of replacing the base paper, sometimes the core drum of the base paper will be damaged. When the core is damaged, Causes 50 meters or more of base paper loss. Therefore, the operator must master the correct methods and skills when loading and unloading the base paper!
1. Install the base paper
1. The cause of paper damage: the operator misjudged the height of the original paper clip and the height of the original paper drum core
During the installation of base paper, the operator misjudged the height of the base paper clip and the height of the core of the original paper barrel, which caused the chuck to crush the edge of the core of the barrel paper during paper jam, which caused the edge of the base paper to be damaged. , Leading to increased delamination damage ...
2. Improvement measures: the original paper clip and the barrel core of the original paper must be kept consistent and parallel
When installing the original paper, the original paper clip and the barrel core of the original paper must be kept consistent and parallel, and then the paper clip is carried out, so as to avoid damage.
Second, unload the paper
1. The cause of paper damage: the core of the original paper barrel of the thimble is not easy to pull out when unloading the paper
Unloading paper is one of the biggest reasons for damaging the original drum core. After the original paper is used, the original paper should be removed. At this time, the core of the original paper barrel of the thimble is not easy to pull out. Many times, it is peeled off by gravity, which will cause damage to the paper tube.
2. Improvement measures: put the original paper flat, then loosen the thimble and pull it out of the core of the original paper drum
Small details like this often occur. The correct way is to first lay the base paper flat, then loosen the thimble and pull it out of the core of the original paper drum
3. Establish a standard operating system and strengthen operating details
There are many directions for the loss of base paper. Only by reducing the loss from each small detail can the overall loss be reduced. Therefore, it is very important to establish a standard operating system. With standard operating details, the operator can also operate more skillfully and work harder on the operating details.
Caulking guns and Sealant guns are designed to hold a cartridge firmly, enabling the application of a smooth, controlled, and straight-line when sealing. Also known as a silicone gun or mastic gun they can be used with a wide range of cartridges and are available in a choice of sizes and designs.
Our Israel patent caulking gun, compact design makes it can reach tricky corners and meet the needs of different working angles. It is suitable for numerous projects around the house and garden. It's versatile for household, hobby and DIY use.
Cordless Caulking Gun,Cordless Silicone Gun,Cordless Sealant Gun,Cordless Adhesive Gun
jiangsu concentric internatinal ltd , https://www.jsconcentriccorps.com