The German Printing Machinery and Equipment Association, Mr. Sigbelt Heldley, put forward:
The market segment of sheetfed offset sheetfed offset is characterized by the following three largest press manufacturers to determine the future development: Heidellberger Drucknashinen AG, MAN roland Drucknaschinen AG and Koenig & Bauer AG. High-performance printing presses and up to 12 printing units, with on-line coating units and other specialized modular equipment, ensure the further growth of quality and productivity. They achieve improved printing by:
- Computers - printing plates or computers - printing presses - shorter and shorter boot preparation time - reduction of start and end time 1
- Through continuous pre-adjustment to reduce scrap - Direct transfer of prepress data to the printing mechanism - Exposure of the plate at the highest speed, printing at the highest speed - Makes job preparation possible through a linearized workflow Networking of auxiliary operations All printer manufacturers provide dedicated software packages for presses to ensure continuity of workflow. The maximum print volume (ie, the balance point) has moved in favor of the single sheet printer and has now reached 18,000 to 25,000 impressions. However, despite its development to a very high level, there is still potential for further improvement in production efficiency.
Web offset printing Web offset printing (printing for commercial printing of newspapers) is progressing. All producers are using shaftless drive technology.
With the prototype of Cortina, an anhydrous newspaper rotary press that uses inkless ink technology, Koenig & Bauer showed a way to print newspapers for the future. The compact 8-unit tower crane is only 3.40 meters high, with a maximum production speed of 80,000 sheets per hour and minimal waste, and this press will reach a practical level within two.
In addition to enhanced newspaper printers such as Coroman, Uniset, Reoman, Coroman and Geoman of MAN Roland Druckmaschinen AG, and Cortina of Koenig & Bauer AG mentioned above. Heidelberg's Mainstream80 will soon be available, an axisless, double-width newspaper press. It uses a seamless blanket Heidelberg Sunday single-sided printing technology, the speed up to 80,000 copies / hour.
In newspaper printing, offset printing still dominates. Other printing methods such as flexographic printing or Dilitho printing have not been widely used. Newspapers are becoming a kind of magazine that provides a variety of information, a guide to multimedia services.
At the Drupa exhibition Maschinen fabrik, Goebel Darmstadt exhibited the latest high-performance screen printers for the production of mail and commercial products such as Novaprint, ecoprint and combiprint. Their working width is from 520 to 760 mm. Giebel presses are also equipped with paper cutters and reelers to handle a variety of paper, plastic film, aluminum foil and packaging materials.
Gravure gravure printing is still used for long live printing. The lowest economic value is between 100,000 and 150,000 copies. The strength of gravure printing lies in its maximum production speed of up to 15m/s. Its working width is 3.60 meters. When combined with flexographic printing, it can also print addresses and variable information without stopping the machine.
Gravure printing provides the highest quality and effective protection process for the long live production and other special printing fields.
Relief/flexographic letterpress printing is now only used as a derivative method of flexographic printing. In addition to packaging gravure printing, letterpress printing is the main process of packaging printing, such as various thin film printing and special printing. Flexographic printing has made great progress in the automation of production processes and the application of new electronic technologies in the prepress area. The new photopolymer plates with 1.14mm and 0.76mm thickness replace the standard 2.84mm rubber plate. The modern sleeve process also contributes to the improvement of package printing quality.
The market segment of sheetfed offset sheetfed offset is characterized by the following three largest press manufacturers to determine the future development: Heidellberger Drucknashinen AG, MAN roland Drucknaschinen AG and Koenig & Bauer AG. High-performance printing presses and up to 12 printing units, with on-line coating units and other specialized modular equipment, ensure the further growth of quality and productivity. They achieve improved printing by:
- Computers - printing plates or computers - printing presses - shorter and shorter boot preparation time - reduction of start and end time 1
- Through continuous pre-adjustment to reduce scrap - Direct transfer of prepress data to the printing mechanism - Exposure of the plate at the highest speed, printing at the highest speed - Makes job preparation possible through a linearized workflow Networking of auxiliary operations All printer manufacturers provide dedicated software packages for presses to ensure continuity of workflow. The maximum print volume (ie, the balance point) has moved in favor of the single sheet printer and has now reached 18,000 to 25,000 impressions. However, despite its development to a very high level, there is still potential for further improvement in production efficiency.
Web offset printing Web offset printing (printing for commercial printing of newspapers) is progressing. All producers are using shaftless drive technology.
With the prototype of Cortina, an anhydrous newspaper rotary press that uses inkless ink technology, Koenig & Bauer showed a way to print newspapers for the future. The compact 8-unit tower crane is only 3.40 meters high, with a maximum production speed of 80,000 sheets per hour and minimal waste, and this press will reach a practical level within two.
In addition to enhanced newspaper printers such as Coroman, Uniset, Reoman, Coroman and Geoman of MAN Roland Druckmaschinen AG, and Cortina of Koenig & Bauer AG mentioned above. Heidelberg's Mainstream80 will soon be available, an axisless, double-width newspaper press. It uses a seamless blanket Heidelberg Sunday single-sided printing technology, the speed up to 80,000 copies / hour.
In newspaper printing, offset printing still dominates. Other printing methods such as flexographic printing or Dilitho printing have not been widely used. Newspapers are becoming a kind of magazine that provides a variety of information, a guide to multimedia services.
At the Drupa exhibition Maschinen fabrik, Goebel Darmstadt exhibited the latest high-performance screen printers for the production of mail and commercial products such as Novaprint, ecoprint and combiprint. Their working width is from 520 to 760 mm. Giebel presses are also equipped with paper cutters and reelers to handle a variety of paper, plastic film, aluminum foil and packaging materials.
Gravure gravure printing is still used for long live printing. The lowest economic value is between 100,000 and 150,000 copies. The strength of gravure printing lies in its maximum production speed of up to 15m/s. Its working width is 3.60 meters. When combined with flexographic printing, it can also print addresses and variable information without stopping the machine.
Gravure printing provides the highest quality and effective protection process for the long live production and other special printing fields.
Relief/flexographic letterpress printing is now only used as a derivative method of flexographic printing. In addition to packaging gravure printing, letterpress printing is the main process of packaging printing, such as various thin film printing and special printing. Flexographic printing has made great progress in the automation of production processes and the application of new electronic technologies in the prepress area. The new photopolymer plates with 1.14mm and 0.76mm thickness replace the standard 2.84mm rubber plate. The modern sleeve process also contributes to the improvement of package printing quality.
The ceramic Garden Pot is a small, decorative container specifically designed for growing and displaying bonsai trees. Made from high-quality ceramic materials, these pots are known for their durability and aesthetic appeal.
Ceramic garden pots come in a variety of shapes, sizes, and colors, allowing bonsai enthusiasts to choose the perfect pot to complement their tree's style and overall design. These pots often feature intricate patterns, textures, or hand-painted designs, adding an artistic touch to the overall presentation.
Glazed Ceramic Garden Pot , Garden Flowerpot , Garden Flowerpot Ceramic
Yixing Bocai Pottery Co.,Ltd , https://www.bocaipottery.com