Model NO.: Cryovac CT-300 Series
Thickness: 10,12,15,19,22,25,30
Brand: Sealed Air
Width: 100-850mm
Processing: Blow Molding
Trademark: FUSHIDE
Origin: Xia Men, China
HS Code: 3920109090
Model NO.: Cryovac CT-300 Series
Thickness: 10,12,15,19,22,25,30
Brand: Sealed Air
Width: 100-850mm
Processing: Blow Molding
Trademark: FUSHIDE
Origin: Xia Men, China
HS Code: 3920109090
Shrink Film Cryovac® CT-300 series general purpose shrink films are based on the patented Sealed Air micro-layering technology
platform. This revolutionary shrink film provides the versatility to wrap small light weight to large heavy products, and
everything in between. The extended footage provides efficiencies to the processor, and the strength of this film
maintains that just-packaged retail appearance through the logistical cycle to the consumer purchase.
TECHNICAL DATA SHEET
Â
| Â | ASTM Test Method | CT-303 | CT-304 |
| Gauge | Â | 42 | 55 |
| Impact Strength Peak Load (lbs) | D3763-95a | 11.4 | 14.3 |
| Haze (%) | D1003-95 | 2.7 | 3.0 |
| Clarity (%) | D1746-92 | 82.8 | 82.7 |
| Gloss (%) | D2457-90 | 85 | 84 |
| Coefficient of Friction (film /film, kinetic) |
D1894-95 | 0.193 | 0.148 |
| Moisture Vapor Transmission Rate (gms /100 sq in / 24 hrs /atm) |
F1249-90 | 1.56 | 1.33 |
| Oxygen Transmission Rate (cc /m² /24 hrs /atm) |
D3985-95 | 11970 | 9280 |
| Tensile Strength(×1000 psi) | D882-95 | 19.1/19.8 | 17.7/19.2 |
| Elongation at Break(%) | D882-95 | 92/93 | 94/120 |
| Modulus(×1000 psi) | D882-95 | 65.4/64.0 | 62.3/63.4 |
| Elmendorf Tear (g) | D1922 | 23.2/25.0 | 34.6/34.1 |
| Shrink Tension (psi) @ 200° F @ 220° F @ 240° F |
D2838-95 | 313/585 420/629 537/637 |
355/540 441/617 498/599 |
| Free Shrink (%) @ 200° F @ 220° F @ 240° F |
D2732-83 | 10/16 18/30 53/58 |
11/16 20/29 55/59 |
STRONG AND EASY-TO-USE
Available in gauges from 30 up to 150, Cryovac® CT-300 series films are easyto- use and can adapt to a wide range of equipment,
often with little to no change in settings. This film also has exceptional optics, retail shelf appeal and performs as well as or better than
materials up to twice the thickness.
SUSTAINABILITY
Sealed Air's patented micro-layering technology provides source reduction without compromising performance. Longer rolls translate to
the additional environmental benefit of reduced cores, cartons, pallets and logistics, plus the production efficiency through extended
up-time and reduced changeovers. Thinner films typically require less heat in the shrinking process, translating to lower electricity
consumption and reduced carbon generation.
RECYCLABLE
Cryovac® CT-300 series of shrink films meet the requirements for SPI recycle code "4" and can be introduced into the LDPE recycle
stream. They are highly desirable to downstream recycling converters and readily used in blown film and injection molding operations.
Sealed Air is proud to partner with the Sustainable Packaging Coalition and its how2recycle program. Our CT-300 series of shrink films
qualify for the new local store dropoff category with collection points located nationwide. Visit how2recycle.info for more information.
Company brief
Service
Payment
1. The TT, Western Union, LC,Money Gram,Cash payment is available.
2. We have the machine in stock. Due to the voltage and mold difference, we need around 30 days to send out the machine.
  We will notice you if there is the special circumstance.
Delivery Time
1. We can send out the machine within 30 days after received the first payment.
2. The machine will be ship to you by sea shipping or plane. Please tell us your sea port or air port name so that we could quote you the freight.
3. You can also buy the insurance for the transportation.
4. We can also provide you door to door service, including custom clearance and tracking transportation in your country.
Warranty
1. All our machine have 1 year free warranty, during the warranty time, all the broken parts(not caused by man factor) can be changed free.
2. We can send our engineer go over sea for adjusting the machine and training your worker in your plant.
3. We have 24 hours hot line and email to help you to resolve the problem within 3 hours.
Contact us
Our Contact Information:
Attn:Alice Â
Mobile:(086)18965174798 Â Â Â
Tel:(086)0592-5058133 Â Â Â Â
Fax:(086)0592-2201468
Website:www.xmfsd.com/cn
 Shrink FilmÂ
Cryovac® CT-300 series general purpose shrink films are based on the patented Sealed Air micro-layering technology
platform. This revolutionary shrink film provides the versatility to wrap small light weight to large heavy products, and
everything in between. The extended footage provides efficiencies to the processor, and the strength of this film
maintains that just-packaged retail appearance through the logistical cycle to the consumer purchase.
TECHNICAL DATA SHEET
Â
| Â | ASTM Test Method | CT-303 | CT-304 |
| Gauge | Â | 42 | 55 |
| Impact Strength Peak Load (lbs) | D3763-95a | 11.4 | 14.3 |
| Haze (%) | D1003-95 | 2.7 | 3.0 |
| Clarity (%) | D1746-92 | 82.8 | 82.7 |
| Gloss (%) | D2457-90 | 85 | 84 |
| Coefficient of Friction (film /film, kinetic) |
D1894-95 | 0.193 | 0.148 |
| Moisture Vapor Transmission Rate (gms /100 sq in / 24 hrs /atm) |
F1249-90 | 1.56 | 1.33 |
| Oxygen Transmission Rate (cc /m² /24 hrs /atm) |
D3985-95 | 11970 | 9280 |
| Tensile Strength(×1000 psi) | D882-95 | 19.1/19.8 | 17.7/19.2 |
| Elongation at Break(%) | D882-95 | 92/93 | 94/120 |
| Modulus(×1000 psi) | D882-95 | 65.4/64.0 | 62.3/63.4 |
| Elmendorf Tear (g) | D1922 | 23.2/25.0 | 34.6/34.1 |
| Shrink Tension (psi) @ 200° F @ 220° F @ 240° F |
D2838-95 | 313/585 420/629 537/637 |
355/540 441/617 498/599 |
| Free Shrink (%) @ 200° F @ 220° F @ 240° F |
D2732-83 | 10/16 18/30 53/58 |
11/16 20/29 55/59 |
STRONG AND EASY-TO-USE
Available in gauges from 30 up to 150, Cryovac® CT-300 series films are easyto- use and can adapt to a wide range of equipment,
often with little to no change in settings. This film also has exceptional optics, retail shelf appeal and performs as well as or better than
materials up to twice the thickness.
SUSTAINABILITY
Sealed Air's patented micro-layering technology provides source reduction without compromising performance. Longer rolls translate to
the additional environmental benefit of reduced cores, cartons, pallets and logistics, plus the production efficiency through extended
up-time and reduced changeovers. Thinner films typically require less heat in the shrinking process, translating to lower electricity
consumption and reduced carbon generation.
RECYCLABLE
Cryovac® CT-300 series of shrink films meet the requirements for SPI recycle code "4" and can be introduced into the LDPE recycle
stream. They are highly desirable to downstream recycling converters and readily used in blown film and injection molding operations.
Sealed Air is proud to partner with the Sustainable Packaging Coalition and its how2recycle program. Our CT-300 series of shrink films
qualify for the new local store dropoff category with collection points located nationwide. Visit how2recycle.info for more information.
Company brief
Service
Payment
1. The TT, Western Union, LC,Money Gram,Cash payment is available.
2. We have the machine in stock. Due to the voltage and mold difference, we need around 30 days to send out the machine.
  We will notice you if there is the special circumstance.
Delivery Time
1. We can send out the machine within 30 days after received the first payment.
2. The machine will be ship to you by sea shipping or plane. Please tell us your sea port or air port name so that we could quote you the freight.
3. You can also buy the insurance for the transportation.
4. We can also provide you door to door service, including custom clearance and tracking transportation in your country.
Warranty
1. All our machine have 1 year free warranty, during the warranty time, all the broken parts(not caused by man factor) can be changed free.
2. We can send our engineer go over sea for adjusting the machine and training your worker in your plant.
3. We have 24 hours hot line and email to help you to resolve the problem within 3 hours.
Contact us
Our Contact Information:
Attn:Alice Â
Mobile:(086)18965174798 Â Â Â
Tel:(086)0592-5058133 Â Â Â Â
Fax:(086)0592-2201468
Website:www.xmfsd.com/cn
Â
Kangtitan pure titanium healthy pot is a subversion of the traditional pot in the material improvement, to remove the potential safety risks caused by the traditional pot because of the material, Using pure titanium material to create composite pot, Pure Titanium Pot has natural rust, corrosion resistance, fast heat conduction, no heavy metal, cooking pot has been very ideal material, compared to ordinary pot, pure titanium pot, save gas time, less lampblack, no heavy metal precipitation and other characteristics are more healthy, long and durable
Titanium Cooking Pot,Heritage Cookware Titanium,Titanium Camping Pot,Ti Pot
Suzhou Xinjingyi Titanium Products Co. , Ltd. , https://www.puretitaniumcookware.com