I don't know if you have encountered a break in the ribbon when you are using a barcode printer. This is usually because of the following reasons. Let me give you a detailed explanation and tell everyone how to solve it.
1. This barcode printer temperature setting is too high or too fast;
2. The quality of the ribbon is too poor;
3. The ribbon supply shaft or the recovery shaft is too strong;
Start troubleshooting:
1. Reduce the temperature and speed, the phenomenon remains;
2. Replace the ribbon, the phenomenon is still the same. But found a strange situation. Each time the light is used up, the ribbon is broken, and a new roll is taken up without breaking the ribbon;
3. In fact, the phenomenon from the above has already bottomed out. It is obvious that this is caused by the excessive pulling force of the ribbon supply shaft. The customer has loosened it with a screwdriver for a few times;
Cause three: The ribbon does not advance with the label, and the print head only heats the ribbon locally (with the printed label gradually fade to the white ticket phenomenon), causing the partially melted ribbon to be broken by the front ribbon.
Solution: Adjust the tension of the front and rear ribbon shafts, reduce the tension of the rear ribbon shaft (the counter-clock adjustment of the rear ribbon shaft adjustment nut), and increase the tension of the front ribbon shaft (the front ribbon shaft adjustment nut is adjusted clockwise) . It is also possible to increase the pressure of the print head appropriately (balanced pressure on both sides, the pressure should not be too large).
The above is the reason and solution for the break of the ribbon printer ribbon. If you want to know more about bar code equipment or bar code consumables, please contact us through WeChat, telephone, official website, etc. We will answer your every reply. A question that will satisfy you.
1. This barcode printer temperature setting is too high or too fast;
2. The quality of the ribbon is too poor;
3. The ribbon supply shaft or the recovery shaft is too strong;
Start troubleshooting:
1. Reduce the temperature and speed, the phenomenon remains;
2. Replace the ribbon, the phenomenon is still the same. But found a strange situation. Each time the light is used up, the ribbon is broken, and a new roll is taken up without breaking the ribbon;
3. In fact, the phenomenon from the above has already bottomed out. It is obvious that this is caused by the excessive pulling force of the ribbon supply shaft. The customer has loosened it with a screwdriver for a few times;
Cause three: The ribbon does not advance with the label, and the print head only heats the ribbon locally (with the printed label gradually fade to the white ticket phenomenon), causing the partially melted ribbon to be broken by the front ribbon.
Solution: Adjust the tension of the front and rear ribbon shafts, reduce the tension of the rear ribbon shaft (the counter-clock adjustment of the rear ribbon shaft adjustment nut), and increase the tension of the front ribbon shaft (the front ribbon shaft adjustment nut is adjusted clockwise) . It is also possible to increase the pressure of the print head appropriately (balanced pressure on both sides, the pressure should not be too large).
The above is the reason and solution for the break of the ribbon printer ribbon. If you want to know more about bar code equipment or bar code consumables, please contact us through WeChat, telephone, official website, etc. We will answer your every reply. A question that will satisfy you.
Create a cleaner, tidier living room it's very important for your living. Shoe cabinets keep footwear neat, tidy and out of sight. Fold-down cabinet doors open to reveal organized shoe racks and close to create a polished appearance.Save time to search for shoes by organizing your collection in one dedicated storage space. The easy track shoe tower keeps up to 15 pairs of shoes and boots in order, up off the floor, and stored neatly in one place so they`re easy to find and put away. The tower is easy to assemble and can be set on the floor or hung on a heavy-duty steel rail to keep floor space open underneath for additional storage.
Shoes Cabinet,Shoe Cupboard,Shoe Rack Cabinet,Shoe Display Case
Baklam , https://www.baklamjm.com