Cutting Width 6000/60"; 7200/72" 6000/60"; 7200/72" Cutting Height 1.5"-5" with Deck Height Control System 1.5"-5" with Deck Height Control System Blades 6000/1/4" x 2 1/2" x 20 1/2", High Lift, Heat Treated
7200/1/4" x 2 1/2" x 24", High Lift, Heat Treated6000/1/4" x 2 1/2" x 20 1/2", High Lift, Heat Treated
7200/1/4" x 2 1/2" x 24", High Lift, Heat TreatedLift and Height Adjustment Instant Lift Electronic Actuator Instant Lift Electronic Actuator Blade Belt Single V-Belt Spring Tension Single V-Belt Spring Tension Anti-Scalp Rollers 6 Total (2 Front, 2 Rear, 1 On Each Corner) 6 Total (2 Front, 2 Rear, 1 On Each Corner) Deck Flotation Floats on 2 Chains & 2 Front Leveling Arms Floats on 2 Chains & 2 Front Leveling Arms Deck Thickness 1/4" Thick Solid Steel 1/4" Thick Solid Steel ENGINE    Gross Horsepower 35HP Caterpillar Diesel 28HP Caterpillar Diesel Cylinders 4 Diesel 3 Diesel Displacement 1.6 L 1.1 L Maximum Torque 94 ft. lbs. @ 3000 RPM 70 ft. lbs. @ 3400 RPM Fuel Requirement Diesel Diesel Fuel Capacity 18 Gallons 18 Gallons Fuel Filter - - Cooling System Liquid-Cooled Liquid-Cooled Ignition Electronic Electronic Starter 12 Volt 12 Volt Charging System 20 amp 20 amp DRIVE SYSTEM   Transmission Dual Hydrostatic Dual Hydrostatic Pump Drive 16 cc Hydro-Gear V-Belt from Engine Crankshaft 16 cc Hydro-Gear V-Belt from Engine Crankshaft Wheel Drive 18 cu. in. High Torque Hydro-Gear Motors 18 cu. in. High Torque Hydro-Gear Motors Hydrostatic System Oil 20W50 Motor Oil 20W50 Motor Oil Hydraulic Filter 25 Micron, Replaceable Spin-On Type, 1 Per Pump 25 Micron, Replaceable Spin-On Type, 1 Per Pump Pumps (2) Hydro-Gear 16 cc, 1 Per Rear Wheel Drive Motor Hydro-Gear 16 cc, 1 Per Rear Wheel Drive Motor Hydraulic Coolers (2) System Designed w/2 Coolers for Lower Temperatures System Designed w/2 Coolers for Lower Temperatures WEIGHT 6000/1540 lbs; 7200/1550 lbs. 6000/1522 lbs; 7200/1535 lbs. Overall Height 52" 52" Overall Width 72 1/2" 61 1/2" Overall Length 85" 85" Tire to Tire Width 6000/58"; 7200/66" 6000/58"; 7200/66" Tires-Front 13 x 6.5-6 Smooth Tread 13 x 6.5-6 Smooth Tread Tires-Rear 26 x 12-12 Turf Tread 26 x 12-12 Turf Tread Steering Dual Lever Steering, Independent Control Dual Lever Steering, Independent Control Turning Radius Zero Degree, Turns Within Unit Length Zero Degree, Turns Within Unit Length Ground Speed (forward) 0-15 mph 0-15 mph Parking Brake Drum Brake Drum Brake
Dressing table, also called toilet table, a table used for the toilet. The term originally was applied in the 17th century to small tables with two or three drawers. It soon became common practice to conceal the fittings of the dressing table when they were not in use, and great ingenuity was exercised by 18th-century cabinetmakers to combine elaborate fittings with a handsome piece of furniture.
In the Cabinet-Makers` London Book of Prices (1788), Thomas Shearer included a design for a dressing stand [with folding tops. The top and bottom fronts are shams, in the back part of the stand is a cistern which receives water from the bason drawer . . . ." The inside included [A glass hung to a sliding piece, 3 powder boxes, a lift-out to hold 4 razors, hone and oil bottle, a ditto for combs, and partion`d off for tooth brushes, a shallow ditto for tweezers, knives etc. . . . ."
Mirrored Dressing Table,Dressing Table Set,Vanity Dressing Table,Dressing Table With Drawers,Wooden Dressing Table,MDF Dressing Table,Dresser With Mirror
Jinan Tri-Tiger Technology Development Co., Ltd , https://www.tritigerwooden.com