The toilet is not strange to us. It is inseparable from the bathroom of each of our families. After we have used the toilet for a long time, we found that the toilet cover is broken. At this time, we need to change the toilet cover. Because everyone doesn't understand, I don't know how to do it. So everyone knows what we need when we change the toilet lid? Today, Xiaobian will take a look at the method of changing the toilet lid and pay attention to it!
How to change the toilet lid:
1. When replacing the toilet cover, you only need to remove the fixing bolt at the back of the toilet to replace it. You can operate it in the opposite direction during installation. Most toilet covers are not sized, and it is enough to adjust the two bolts during installation. However, it is also necessary to measure the size, screw hole distance, width and length of the toilet cover, and then purchase a new toilet cover for replacement!
2, find the screw cap, use a live hand to remove, and then replace it with a new one. Generally, the position of the screw cap is not easy to find, some are in the bright spot, and some are in the dark. In the dark, screw cap, open the cover on the side of the tank inside the toilet. Put it in your hand and touch it in the direction of the water tank. You should be able to touch it and see it is invisible.
3, under normal circumstances is the bottom of the toilet lid connected to the toilet position, the back is screwed up, as long as the hand stretched down and found the screws on both sides can be used to take the entire cover down, very simple, you Can try.
Note on changing the toilet cover:
1. The receipt of the goods will be installed after the acceptance of the face: the toilet should be subjected to strict quality inspection before leaving the factory, such as testing water, visual appearance, etc. The products that can be sold in the market are generally qualified, but remember, no matter how big The brand must also be inspected in front of the merchant to check whether there are obvious defects and bruises, and whether there is color difference in each part.
2. Check and adjust the ground level: After buying the toilet and sealing cushion of the same wall distance, you can start the installation. Before the installation of the toilet, the sewage pipeline should be inspected thoroughly to see if there are any mud and sand, waste paper and other debris in the pipeline. At the same time, check whether the floor of the toilet installation is horizontal or not. If the ground is found to be uneven, the toilet should be installed. Level the ground. Saw the drain so that the drain is 2mm-5mm above the ground as far as possible.
3. Check the installation of the water tank fittings to check for leaks: first check the water pipe, drain the water for 3-5 minutes to ensure the cleaning of the water pipe; install the angle valve and the connecting hose, then install the hose and the installed water tank. The inlet valve of the accessory is connected and connected to the water source, check whether the inlet valve and the sealing of the inlet valve are normal, whether the installation position of the drain valve is flexible, whether there is jamming or leakage, and whether there is a leaking inlet valve filter device.
4. Finally, test the sewage discharge effect of the toilet: the method is to install the accessories in the water tank, fill the water, try the flushing of the toilet, if the water flow vortex is very urgent and rushes quickly, indicating that the water is unobstructed, and vice versa, check whether There is a blockage.
What we need to know when we change the toilet lid is its method. After we learn it, our toilet can be replaced at any time. The above is the method and attention points for the change of the toilet cover introduced for you today. I want to know more information, please continue to pay attention to the decoration home.
More related wonderful reading:
What are the functions of the smart toilet seat? How to change the toilet cover
How to change the toilet lid to change the toilet lid
Compared with silver mirrors, copper-free mirrors are of a higher grade. After the Silver Mirror is plated with silver, a layer of copper will be plated to protect it to prevent the mirror from being damaged and easily scratched. The copper-free mirror is to replace the copper protective film with a passivation protective film, making the mirror more environmentally friendly and durable. The passivation protective film of the copper-free mirror makes the mirror more wear-resistant, and is superior to ordinary silver mirrors in adhesion and corrosion resistance.
In addition, we also sell Silver Mirror glass, silver mirror commonly known as waterproof mirror, mercury mirror, silver-plated mirror on glass surface, glass mirror, mirror glass, etc. Silver mirrors are widely used in furniture, handicrafts, decoration, bathroom mirrors, cosmetic mirrors, optical mirrors, and car rearview mirrors.
copper free mirror, copper tinted mirror, tinted copper free mirror and glass
Dongguan Huahui Glass Manufacturing Co.,Ltd , https://www.antiquemirrorsupplier.com