In our daily life, we can often see a paint with a metallic color on the surface, which is called metal fluorocarbon paint. It has strong weather resistance and self-cleaning properties, and is often used in outdoor wall paint to reduce the number of maintenance. So what are the characteristics of metal fluorocarbon paint, and what is the construction process, the following article will introduce to you.
What are the characteristics of metal fluorocarbon paint
1. Metal fluorocarbon paint has excellent strong weather resistance and durability, and will not change color under ultraviolet light, and the service life can be up to about 20 years.
2. Metal fluorocarbon paint has excellent chemical resistance, anti-corrosion, anti-acid and alkali characteristics, and can be used as anti-corrosion wall paint.
3. The metal fluorocarbon paint has excellent antifouling performance, and the paint surface can be directly cleaned with a cleaning agent.
4. The metal fluorocarbon paint film is hard, high impact strength, excellent wear resistance, and will not easily fall off the paint.
5. The color of the metal fluorocarbon paint is very rich, with two effects: gold flash and silver flash. You can also add pearlescent pigments inside to make it produce a pearlescent effect.
Construction technology of metal fluorocarbon paint
1. Spraying
The metal fluorocarbon paint needs to be dried for at least 15 hours after spraying. It is best to brush it twice to make the paint surface performance better.
2. Polish
You need to use 600 to 800 mesh fine sandpaper to polish. Do not use too much force when polishing to avoid wearing the primer film. Grinding needs to be careful, otherwise the paint spraying effect will become poor.
3. Dust removal
You need to use a rag to remove dust. If the dust is not thoroughly removed, the surface of the coating film will not be smooth after the topcoat is applied, and particles will appear.
4. Construction requirements
After spraying, the color needs to be uniform and the color is the same. After sanding and dust removal, the surface of the coating film should be smooth and free of dust and impurities. At the same time, the surface of the putty layer should have a coating film with a thickness of 50 to 80 microns. Any leakage phenomenon.
5. Construction ratio
It is necessary to strictly mix the main paint with the curing agent according to the requirements of the manufacturer's instructions, add an appropriate amount of thinner, and then use a 100-mesh filter to filter, and it must be used within 4 hours, otherwise the mixture will gel and produce its effect influences.
6. Filtration
After the preparation is completed, it needs to be filtered with a 100 mesh filter, and the mixture needs to be stirred all the time to prevent precipitation.
7. Construction method
Metal fluorocarbon paint must be sprayed, other solid paint can be applied by roller.
8. Construction requirements
The glitter powder should be evenly distributed with the same density as the model. No unevenness and blooming. The gloss of the paint surface is even, the hand feels delicate, and there are few particles on the coating film.
Summary of the article: The above is the relevant introduction about the characteristics of metal fluorocarbon paint and the construction process. I hope everyone can have a certain understanding of metal fluorocarbon paint. At present, metal fluorocarbon paint is widely used and has very good decorative effects.
What, the decoration still uses his own money? ! The Qi family is decorated in installments, with an ultra-low annual interest rate of 3.55% and a maximum loan of 1 million. Apply now to enjoy the discount
If you are interested in brand cooperation, content cooperation, and advertising of this website, please send an email to :.
Side Wheel For Soft Luggage,Wheel For Suitcase,Side Wheel,Luggage Corner Wheel
GUANGDONG SUNDES LUGGAGE ACCESSORY TECHNOLOGIES CO.,LTD , https://www.sundes-global.com