Choosing a custom wardrobe design is not an unsatisfactory design, or a size that is not suitable for a room type, or other problems that are very troublesome for many owners. For these problems, today's small series for everyone to check the custom wardrobe purchase points, together to see what are the points to buy custom wardrobe.
Purchase custom wardrobe attention points one
Profile
There are two types of practical profile substrates: one is aluminum alloy and the other is plastic steel. Due to its light weight and high strength, aluminum alloy is a high-grade material for sliding door substrates. Has gradually replaced plastic steel products. The aluminum alloy itself is divided into ordinary aluminum-magnesium alloy and smaller aluminum-magnesium alloy for special aviation. Because aluminum-magnesium-titanium-silicon alloy has higher strength and smaller weight. Therefore, it is favored by consumers, but the cost is several times that of ordinary aluminum-magnesium alloy. When looking at the profile, not only pay attention to the substrate, but also observe its surface treatment. Advanced surface treatments include anodizing, electrophoretic coating carbon coating, etc. These processes have higher hardness and aesthetics than simple spraying and plating. The electrophoretic coating used by KD in the United States has a film thickness of 20 microns and the adhesion reaches the international highest standard of 0, which has unparalleled scratch resistance.
Buy custom wardrobe attention points two
Top rail
At the time, try to choose the top and bottom rails of the same material as one material, thinking that the top bottom rail is the load-bearing part. To withstand repeated friction, the top and bottom rails must have high strength and wear resistance. The top and bottom rails are made of aluminum-magnesium-titanium-silicon alloy with higher strength, strong resistance to deformation and longer service life.
Buy custom wardrobe attention points three
Top wheel
The top and bottom wheels are important accessories for sliding doors. It is necessary to pay attention to the selection of high-quality bearing pulleys. The outer part of the bottom wheel is made of FRP material, which has the characteristics of high strength, wear resistance and low noise. Using push-pull more than 100,000 times, the wheel body is treated with three-degree polishing and plating, never rusting.
Buy custom wardrobe attention points four
Rubber strip
The main materials popular in the market are PVC rubber, silica gel and the like. The silica gel strip is made of a non-toxic, non-corrosive silicone material. It also maintains good toughness at ultra-low temperatures, ensuring a flexible connection between the sheet and the profile.
Buy custom wardrobe attention points five
Sheet, substrate
The common leeks used in cabinet plates are blockboard, MDF, and moisture-proof particleboard. Among them, the most cost-effective is the moisture-proof particle board, which has the advantages of light weight, high strength, strong nail holding power, etc., but the moisture-proof particle board also has different qualities.
Buy custom wardrobe attention points six
Glue, edge banding, veneer
The edge banding mainly seals the section of the sheet. Achieve damage to the board from environmental or unfavourable factors in use (mainly moisture). Also achieve decorative effects. Ordinary glue has a pungent odor due to the presence of formaldehyde, and there is a risk of carcinogenicity. Therefore, when purchasing, pay attention to whether the cabinet has any odor.
Desk And Chair,Table And Chair,School Student Desk,Kids Chair For School
AU-PINY FURNITURE CO., LTD , https://www.jiangmenaupiny.com