There are a lot of medium and micro printers on the market, each with its own scope of application. There are many types of micro printers. Micro-printers are widely used in various industries, such as instrumentation, supermarkets, convenience stores, postal services, banks, tobacco monopoly, utility meter reading, mobile police systems, mobile government systems, and so on.
Introduction to the related knowledge of micro printers:
Print format: The size of the paper that the printer can print. For micro printers, it is called the width of the paper.
Paper width: The width of the paper that the micro printer can print.
Print Width: The width of the print area of ​​the micro printer.
Print driver: A program on a computer that interprets data that an application needs to print into a print control language that a micro-printer can recognize.
Paper thickness: Micro-printers can only print a certain range of paper thickness, which is called paper thickness. If the paper exceeds or is insufficient, the paper thickness will cause many problems, such as the inability to feed paper, paper jam, poor print quality, etc. .
Built-in font: The built-in font is the font stored in the non-volatile memory of the printer. If the font used for printing the document already exists in the printer, the data transmitted by the computer to the printer can be greatly reduced, and the printing speed can be improved.
Paper feeding method: The way the printing paper depends on the movement of the printer. Laser printers, inkjet printers and micro-printers generally use friction feeding. The table needles generally use both friction feeding and hole feeding.
Print Control Command: The computer controls the printer operation by means of a software command by printing the control language, interpreting the execution of the print data, and obtaining the print result. The print control language is the foundation for the complex functions implemented by printers. It is directly related to the quality of print input quality.
Paper cutting method: Because the paper is used in the micro-printer, after the printing, the paper has not been used up, and the printed part needs to be torn off. In the early days, the paper was manually torn, and now some printers rely on the machine to tear the paper. Automatic paper cutting, automatic paper cutting is also divided into full cut (all cut from the end of printing), partial cut (most of the cut from the end of the print, leaving only a small part connected to the roll paper, this is Prevent the user from holding the printed paper, and the paper flies.)
Introduction to the related knowledge of micro printers:
Print format: The size of the paper that the printer can print. For micro printers, it is called the width of the paper.
Paper width: The width of the paper that the micro printer can print.
Print Width: The width of the print area of ​​the micro printer.
Print driver: A program on a computer that interprets data that an application needs to print into a print control language that a micro-printer can recognize.
Paper thickness: Micro-printers can only print a certain range of paper thickness, which is called paper thickness. If the paper exceeds or is insufficient, the paper thickness will cause many problems, such as the inability to feed paper, paper jam, poor print quality, etc. .
Built-in font: The built-in font is the font stored in the non-volatile memory of the printer. If the font used for printing the document already exists in the printer, the data transmitted by the computer to the printer can be greatly reduced, and the printing speed can be improved.
Paper feeding method: The way the printing paper depends on the movement of the printer. Laser printers, inkjet printers and micro-printers generally use friction feeding. The table needles generally use both friction feeding and hole feeding.
Print Control Command: The computer controls the printer operation by means of a software command by printing the control language, interpreting the execution of the print data, and obtaining the print result. The print control language is the foundation for the complex functions implemented by printers. It is directly related to the quality of print input quality.
Paper cutting method: Because the paper is used in the micro-printer, after the printing, the paper has not been used up, and the printed part needs to be torn off. In the early days, the paper was manually torn, and now some printers rely on the machine to tear the paper. Automatic paper cutting, automatic paper cutting is also divided into full cut (all cut from the end of printing), partial cut (most of the cut from the end of the print, leaving only a small part connected to the roll paper, this is Prevent the user from holding the printed paper, and the paper flies.)
Cavitation Slimming Machine,Cavitation Machine,Ultra Cavitation Machine,Laser Cavitation Machine
Guangzhou serika Technology Co., Ltd. , https://www.serikamedical.com