[ Chinese wardrobe net ] There is a space for the entrance to my home, which is about 78 cm deep and 1.44 meters long. The workers said that the space like this is that the developers leave everyone to play the cabinet. Can only be customized on-site, furniture manufacturers will not be accurate to such a size, or not plugged in, or there is a gap is difficult to see. But I think the scene is too ugly to buy finished products. In addition, I want to make the ceiling of the cabinet. I don't know if it can be. The height of the room is about 2.7 meters, and it will not be deformed. Please expert guidance. Ms. Yu
Refining size
“The cabinets that are going to be in the wall must be measured after the renovation is completed.†This is the most important advice the experts give to the readers.
According to Mr. Zhou, the general manager of a furniture, many families now have the same confusion as Ms. It is the wall hole reserved by the developer whether it is a live cabinet or a custom finished cabinet. "These two methods are all right, but the cabinets that are to be topped are counted as non-standard cabinets at many furniture manufacturers, and the fees are higher. But for enterprises with a very high degree of computer numerical control, the production of non-standard sizes is actually There is no difference from the standard size."
Mr. Zhou provided a lot of experience. For example, “the wall of the fortress cabinet must be horizontal and vertical so that it can be tightly combined with the cabinet. Therefore, it is best for Ms. Yan to ask the workers to shave all the faces of the wall vertically and evenly; After the wall paint is completed, re-measure the required size of the cabinet to prevent the difference; to measure from the top to the bottom, take the minimum value as the size of the cabinet; install it first, then push the wall In the body."
If the wall has more deviations, it is more difficult to adjust, and it can be beautified by adding a baffle on the side.
Through the top wardrobe to guard against deformation
Under normal circumstances, the cabinets provided by furniture manufacturers will not exceed 2.4 meters, but the height of most consumers' homes is around 2.6 meters to 2.7 meters. The problem of cabinet deformation has to be considered.
Manager Zhou said that many manufacturers tell consumers when they are doing the top wardrobe, they must do it in two sections, in order to prevent deformation. "Actually, this statement is not accurate. It is likely that they do not have such a large panel." According to reports, the most common plate length in the industry is about 2.44 meters, and the entire plate cannot be used beyond this length. However, the EGGER board and some brand-customized panels have ultra-large panels, which can achieve the overall effect of the ultra-high cabinet, stability and aesthetics. At the same time, he also emphasized that if the cabinet is too high, the door will become heavier, so the hardware such as hinges is very important. Consumers must not be taken lightly in the choice of hardware, otherwise it is prone to danger.
Determining the quality of the details
In addition to being closely aligned with the wall, environmental protection is of course important. According to experts, you can feel the internal quality of the wardrobe from some hidden places. For example, observe the cross section of the plate from some openings. The cross section of the good plate is uniform and the color is light. The fiber is long and dense, and the plate is almost white. There are black impurities mixed in the middle, the color is deep, the fiber is short and loose; the flattening, smooth, dense and uniform of the sealing edge of the board proves that the workmanship of the product is finer, on the contrary, the edge banding is rough, cocked, cracked, convex and concave. In other cases, it not only indicates that the product is rough in work, but also easy to scratch clothing or skin when used; the hardware accessories used in good wardrobes are also hardware accessories of well-known brands, and more anti-counterfeiting marks are printed. High-quality hardware accessories can significantly extend the service life of the wardrobe, while quality hardware accessories can not only guarantee the service life. Repeated replacement may cause the wardrobe to be unable to be used normally. In addition, some humanized design will make the consumer use the process. Benefit from it.
The silent design of the slide rails and pulleys can make people switch to the sliding door type wardrobe without affecting the person who is resting; the hinged hinges, pulleys, slide rails, crash pads, etc. can avoid the collision between the wardrobe door and the edge of the wardrobe. Extend the service life; the addition of moisture-proof plug can not only improve the moisture-proof effect of the wardrobe, but also reduce the emission of harmful substances in the substrate; the addition of the sealing strip improves the sealing of the wardrobe and facilitates cleaning.
The hand crank Standing Desk is to rotate the gear through the hand rocker, and then drive the lifting spindle to rise and fall to achieve the purpose of adjusting the height of the desk and chair
advantage:1. Low price, high cost performance 2. No need to power on, no refueling, good safety 3. Gear work, not easy to cause problems, long service life, low noise
Disadvantages:1. Slow lifting speed 2. The load is not as good as electric
Adjustable Laptop Desk,Adjustable Standing Desk,Hand Crank Standing Desk,Adjustable Sit Stand Desk
Suzhou Uplift Intelligent Technology Co., Ltd , https://www.office-standing-desk.com